View Single Post
Old 07-08-13, 08:22 PM   #5
ant
A GeForced Ant
 
ant's Avatar
 
Join Date: Sep 2002
Location: An Ant Farm
Posts: 348
Post Re: Modding my old EVGA GeForce 8800 GT video card's fan to blow heat from the PC cas

Quote:
Originally Posted by Zapablast05 View Post
Post your temps in Celsius lol. I'm not used to Fahrenheit when it comes to PC temps.

What are you using to monitor those temps and fan speeds?
Not too hot right now (80+F/26.6666... degrees). I use Linux's lm_sensors:

$ sensors
coretemp-isa-0000
Adapter: ISA adapter
Core 0: +58.0C (high = +80.0C, crit = +100.0C)
Core 1: +56.0C (high = +80.0C, crit = +100.0C)
Core 2: +57.0C (high = +80.0C, crit = +100.0C)
Core 3: +59.0C (high = +80.0C, crit = +100.0C)

f71882fg-isa-0a00
Adapter: ISA adapter
+3.3V: +3.28 V
in1: +1.14 V (max = +2.04 V)
in2: +0.86 V
in3: +0.94 V
in4: +1.09 V
in5: +0.89 V
in6: +0.70 V
3VSB: +3.30 V
Vbat: +3.22 V
fan1: 1102 RPM
fan2: 1116 RPM
fan3: 0 RPM ALARM
fan4: 0 RPM ALARM
temp1: +35.0C (high = +85.0C, hyst = +81.0C)
(crit = +50.0C, hyst = +46.0C) sensor = transistor
temp2: +43.0C (high = +85.0C, hyst = +81.0C)
(crit = +100.0C, hyst = +96.0C) sensor = transistor
temp3: FAULT (high = +70.0C, hyst = +68.0C)
(crit = +85.0C, hyst = +83.0C) sensor = transistor

adt7473-i2c-4-2e
Adapter: NVIDIA i2c adapter 2 at 5:00.0
in1: +3.00 V (min = +0.00 V, max = +2.99 V)
+3.3V: +3.25 V (min = +0.00 V, max = +4.39 V)
fan1: 3896 RPM (min = 0 RPM)
fan2: 0 RPM (min = 0 RPM)
fan3: 0 RPM (min = 164 RPM) ALARM
temp1: +74.0C (low = +65.0C, high = +85.0C)
(crit = +100.0C, hyst = +98.0C)
Board Temp: +64.8C (low = +20.0C, high = +60.0C) ALARM
(crit = +100.0C, hyst = +96.0C)
temp3: +73.5C (low = +80.0C, high = +105.0C) ALARM
(crit = +117.0C, hyst = +113.0C)
__________________
Ant @ The Ant Farm (http://antfarm.ma.cx) and Ant's Quality Foraged Links (http://aqfl.net).
ant is offline   Reply With Quote