View Single Post
Old 01-23-04, 06:56 AM   #1
orkolorko
Registered User
 
Join Date: Jan 2004
Posts: 3
Default segmentation fault

When I start X i just get a black screen.
Then I shift to text console from which I started the Xserver and I get a segmentation fault error.
Barton XP 2500+ MB K7VTA3+MSI FX5200 128 MB RAM+512 MB RAM
Here is the configuration file follows:

----------------------------------------------------------------------
Section "ServerLayout"
Identifier "XFree86 Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
ModulePath "/usr/X11R6/lib/modules"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/CID/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
EndSection

Section "Module"
Load "extmod"
Load "dbe"
Load "record"
Load "xtrap"
Load "glx"
Load "speedo"
Load "type1"
EndSection

Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
EndSection

Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "ps/2"
Option "Device" "/dev/psaux"
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Samsung"
ModelName "Syncmaster 15 GLe"
HorizSync 30-50
VertRefresh 50-100
EndSection

Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "DigitalVibrance" # <i>
#Option "NoFlip" # [<bool>]
#Option "Dac8Bit" # [<bool>]
#Option "NoLogo" # [<bool>]
#Option "UBB" # [<bool>]
#Option "Stereo" # <i>
#Option "SWcursor" # [<bool>]
#Option "HWcursor" # [<bool>]
#Option "VideoKey" # <i>
#Option "NvAGP" # <i>
#Option "IgnoreEDID" # [<bool>]
#Option "NoDDC" # [<bool>]
#Option "ConnectedMonitor" # <str>
#Option "ConnectedMonitors" # <str>
#Option "TVStandard" # <str>
#Option "TVOutFormat" # <str>
#Option "RenderAccel" # [<bool>]
#Option "CursorShadow" # [<bool>]
#Option "CursorShadowAlpha" # <i>
#Option "CursorShadowXOffset" # <i>
#Option "CursorShadowYOffset" # <i>
#Option "UseEdidFreqs" # [<bool>]
#Option "FlatPanelProperties" # <str>
#Option "TwinView" # [<bool>]
#Option "TwinViewOrientation" # <str>
#Option "SecondMonitorHorizSync" # <str>
#Option "SecondMonitorVertRefresh" # <str>
#Option "MetaModes" # <str>
#Option "UseInt10Module" # [<bool>]
#Option "NoTwinViewXineramaInfo" # [<bool>]
#Option "NoRenderExtension" # [<bool>]
#Option "Overlay" # [<bool>]
#Option "CIOverlay" # [<bool>]
#Option "ForceEmulatedOverlay" # [<bool>]
#Option "TransparentIndex" # <i>
#Option "OverlayDefaultVisual" # [<bool>]
#Option "NvEmulate" # <i>
#Option "NoBandWidthTest" # [<bool>]
#Option "CustomEDID-CRT-0" # <str>
#Option "CustomEDID-CRT-1" # <str>
#Option "CustomEDID-DFP-0" # <str>
#Option "CustomEDID-DFP-1" # <str>
#Option "CustomEDID-TV-0" # <str>
#Option "CustomEDID-TV-1" # <str>
#Option "TVOverScan" # <f>
#Option "IgnoreDisplayDevices" # <str>
#Option "MultisampleCompatibility" # [<bool>]
#Option "RegistryDwords" # <str>
#Option "NoPowerConnectorCheck" # [<bool>]
Identifier "Card0"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "Unknown Board"
BusID "PCI:1:0:0"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Depth 1
EndSubSection
SubSection "Display"
Depth 4
EndSubSection
SubSection "Display"
Depth 8
EndSubSection
SubSection "Display"
Depth 15
EndSubSection
SubSection "Display"
Depth 16
Modes "800x600" "1024x768"
EndSubSection
SubSection "Display"
Depth 24
Modes "800x600" "1024x768"
EndSubSection
EndSection
orkolorko is offline   Reply With Quote