Thread: SATA question
View Single Post
Old 01-24-04, 01:48 PM   #2
Moled
cheese
 
Join Date: Aug 2003
Posts: 137
Default

according to:

http://www.asus.com/prog/spec.asp?m=A7N8X%20Deluxe

you have: Silicon ImageŽ Sil 3112A Controller with 2 ports

which is the same as what im using

lspci:
03:0b.0 RAID bus controller: CMD Technology Inc Silicon Image SiI 3112 SATARaid Controller (rev 02)


it works fine

dmesg:
SiI3112 Serial ATA: IDE controller at PCI slot 0000:03:0b.0
SiI3112 Serial ATA: chipset revision 2
SiI3112 Serial ATA: 100% native mode on irq 19
ide2: MMIO-DMA at 0xf9812000-0xf9812007, BIOS settings: hde:pio, hdf:pio
ide3: MMIO-DMA at 0xf9812008-0xf981200f, BIOS settings: hdg:pio, hdh:pio

oh make sure you use 2.6.1 at least
security issue with 2.6.0 and before
Moled is offline   Reply With Quote