View Single Post
Old 02-05-04, 04:28 AM   #22
gilboa
Linux addict...
 
Join Date: Jan 2004
Posts: 540
Default

Here's the current working setup:
[root@gilboa-home-dev root]# lspci -v -s 01:05.0
01:05.0 VGA compatible controller: nVidia Corporation: Unknown device 0331 (rev a1) (prog-if 00 [VGA])
Flags: bus master, 66Mhz, medium devsel, latency 248, IRQ 16
Memory at be000000 (32-bit, non-prefetchable) [size=16M]
Memory at c0000000 (32-bit, prefetchable) [size=256M]
Expansion ROM at bffe0000 [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Capabilities: [44] AGP version 3.0
[root@gilboa-home-dev root]# cat /proc/mtrr
reg00: base=0x00000000 ( 0MB), size=1024MB: write-back, count=1
reg01: base=0xc0000000 (3072MB), size= 256MB: write-combining, count=1
reg02: base=0xe0000000 (3584MB), size= 256MB: write-combining, count=1
[root@gilboa-home-dev root]# dmesg | grep agp
agpgart: Detected AMD 760MP chipset
agpgart: Maximum main memory to use for agp memory: 941M
agpgart: AGP aperture is 256M @ 0xe0000000
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:05.0 into 4x mode

Cheers,
Gilboa
gilboa is offline   Reply With Quote