View Single Post
Old 02-23-04, 07:20 PM   #1
wslyhbb
Registered User
 
Join Date: Feb 2004
Location: Zion, IL
Posts: 3
Send a message via AIM to wslyhbb
Default problem with nVidia driver on Mandrake 9.2

I have a fresh install of Mandrake 9.2 PowerPack
Kernel is 2.4.22-10mdk
Video Card is PNY Geforce3 TI 200
Processor is AMD Athlon XP 1700+
Motherboard is Giga-byte GA-7vRX
Mandrake's nVidia driver did not seem to work, so I installed the new
nVidia driver from nVidia (1.0-5336-pkg1), made the changes to the
XF86Config-4 file as the documentation told me to, rebooted and the
screen flashed a few times and dumped me to command-line. The video bios is not being detected or something according to the /proc/driver/nvidia/cards/0 file.
Model: GeForce3 Ti 200
IRQ: 16
Video BIOS: ??.??.??.??.??
Card Type: AGP
The XF86Config-4 file is as follows:

# File generated by XFdrake.

# ************************************************** ********************
# Refer to the XF86Config man page for details about the format of
# this file.
# ************************************************** ********************

Section "Files"
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Mandrake 6.0 and later now use a font server independent of
# the X server to render fonts.
FontPath "unix/:-1"
EndSection

Section "ServerFlags"
AllowMouseOpenFail # allows the server to start up even if the mouse doesn't work
#DontZap # disable <Crtl><Alt><BS> (server abort)
#DontZoom # disable <Crtl><Alt><KP_+>/<KP_-> (resolution switching)
EndSection

Section "Module"
Load "dbe" # Double-Buffering Extension
Load "v4l" # Video for Linux
Load "extmod"
Load "type1"
Load "freetype"
Load "/usr/X11R6/lib/modules/extensions/libglx.so"
Load "glx"
EndSection

Section "InputDevice"
Identifier "Keyboard1"
Driver "Keyboard"
Option "XkbModel" "pc105"
Option "XkbLayout" "en_US"
Option "XkbOptions" ""
EndSection

Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "PS/2"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons"
Option "Emulate3Timeout" "50"
EndSection

Section "Monitor"
Identifier "monitor1"
VendorName "Plug'n Play"
HorizSync 30-96
VertRefresh 50-160

# Sony Vaio C1(X,XS,VE,VN)?
# 1024x480 @ 85.6 Hz, 48 kHz hsync
ModeLine "1024x480" 65.00 1024 1032 1176 1344 480 488 494 563 -hsync -vsync

# TV fullscreen mode or DVD fullscreen output.
# 768x576 @ 79 Hz, 50 kHz hsync
ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630

# 768x576 @ 100 Hz, 61.6 kHz hsync
ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616
EndSection

Section "Device"
Identifier "device1"
VendorName "nVidia Corporation"
BoardName "NVIDIA GeForce3 (generic)"
Driver "nvidia"
Option "DPMS"
EndSection

Section "Screen"
Identifier "screen1"
Device "device1"
Monitor "monitor1"
DefaultColorDepth 24

Subsection "Display"
Depth 8
Virtual 1024 768
EndSubsection

Subsection "Display"
Depth 15
Virtual 1024 768
EndSubsection

Subsection "Display"
Depth 16
Virtual 1024 768
EndSubsection

Subsection "Display"
Depth 24
Virtual 1024 768
EndSubsection
EndSection

Section "ServerLayout"
Identifier "layout1"
Screen "screen1"
InputDevice "Keyboard1" "CoreKeyboard"
InputDevice "Mouse1" "CorePointer"
EndSection

I am including the log file. Please tell me what I am doing wrong, and how I can fix it. Any help will be much appreciated.
Attached Files
File Type: log xfree86.0.log (14.0 KB, 88 views)
wslyhbb is offline   Reply With Quote