View Single Post
Old 04-19-04, 07:48 PM   #3
ronathome
Registered User
 
Join Date: Apr 2004
Posts: 8
Default Re: Quadro4 700XGL twinview problem - hardware issue?

Thanks for the help - The layout is much clearer to me know ;^)

However, the problem remains. I have attached the new, simpler, XF86Config file and resulting XFree86.0.log file. There is only one ScreenLayout section, one screen section, and one device section. If you look carefully at the original it is possible to work out that it was in fact using the correct sections anyway. It was confusing though, so now it's much simpler!

So the driver seems to think it has set up twinview correctly, and it uses the same refresh rates for both monitors. If I switch monitors my screen appears on whichever monitor is attached to the DRI port via the VGA adapter - so obviously both monitors can cope with the refresh rates being put out. The monitor connected to the standard VGA port shows nothing.

Any thoughts?

Thanks in advance

Ron
Attached Files
File Type: txt XF86Config.txt (5.2 KB, 174 views)
File Type: txt XFree86_0_log.txt (28.3 KB, 188 views)
ronathome is offline   Reply With Quote