View Single Post
Old 07-29-04, 10:22 AM   #1
Registered User
Join Date: Jul 2004
Posts: 3
Default 2 Riva TNT2 bios don't work -chipset SiS635

I ask someone to translation my question, because my English is poor. If someone can answer, thanks.:

- I have used three boards, model 'Nvidia Riva TNT2 M64 PCI' on the Motherboard PCCHIPS M701G (chipset Sis635; Via C3 processor ), with on board video card (Linux recognize as AGP SiS300/200). The driver is
- One of them, the oldest model, has BIOS (or firmware) version 2.05.14a,
while the most recent purchased version has BIOS In order to
use the most recent version in Linux it is necessary to use the Driver
provided by Nvidia and in the configuration file (XF86Config) add the following parameter: - Option "UseInt10Module" "on" .

The objective is to have 3 boards (2 Riva TNT2 PCI and 1 AGP on board), however when I try to add new board (new version), none of the previous installed boards are initiated, with or without the parameters. If I put a new version board with the parameter and an old version board, without the parameters, the system works properly. I would like to find out if there is some specific parameter that needs to be used in order for the new board to work like the old version what is the solution?

Please let me know or point me in the right direction to where I can find
such solution, I feel confident that you must had encounter similar
situations with other people or while performing your tests.

Thank you very much for your time and attention.



My system:
Logon: Kdm
Attached Files
File Type: txt XF86Config.txt (9.8 KB, 171 views)
File Type: txt Xservers.txt (752 Bytes, 156 views)
CelsoSilva is offline   Reply With Quote