volt modding the 5950u
hello, i posted before on this, but i lost the thread... after much searching, i have concluded that i think the thread has been deleted or the search function of this board completely sucks.
either way, i am looking to increase my volts on my 5950u. does anyone here know of the best method for doing this? i've got an eVGA 5900u flashed to an eVGA 5950u, and my volts are set to 1.5v. i get 45C load, and 32C idle. the card is chilled plenty for an increase in voltage, i just think it can overclock much more with higher volts. currently, i can only get 620 at the core (using coolbits it wont pass the test over 598 core, but it runs at 620 without artifacts using powerstrip).
i also have good ram cooling with ramsinks... the card has been modified a great deal in the way of cooling.
i hear you can't go any higher than 1.5v in the bios of the 5950u, so if that's true, do you know of any websites that have info on volt modding by physical change to the card?
hardware murdered so far: geforce 5900u, deceised: sat on it. geforce 6600gt deceised: improperly mounted heatsink. 3 asus a7n8x-e deluxe motherboards, deceised: unsure. mobile amd xp2600 processor, deceised: chipped core due to compusa heatsink. dfi lanparty ultra b, deceised: unsure, third memory bank went out. samsung cd burner 48x40x48, deceised: unsure, will only read pressed cd's very slowly. samsung TH552C dvd burner (dual layer), deceised: same as other samsung . 10gb seagate 5200rpm drive, deceised: tried fixing a pin that was pushed into the drive by inserting an ide cable upside down. 40gb maxtor drive, deceised: maxtor manufacturer. 80gb western digital, deceised: unnatural causes. swan xt10, deceised: brutal pre-meditated murder, even video taped (it wasn't y2k compliant). logitech mx510, deceised: death by electricution. ati remote wonder, deceised: death by electricution.