Re: How does one get sound working under a fresh Debian 3.0 install?
i got the same problem.
I've also tried to build OSS-Support in Kernel as module. Read here something about to activate OSS but not to build a driver-module. At the moment nvsound uses soundcore module, as lsmod said.
I'm using a ASUS A7N8X-Deluxe. I had to upgrade the BIOS so that I don't run into the APIC Bug. I have ACPI and APIC support on.
I turned off the "enable apic"-option in bios. I got the same results.
At the moment I'm at the same point as you.
When I try to play something systemlog says: (mp123, xmms)
Aug 24 22:43:52 trinity kernel: Nvsound: Set format as 10
Aug 24 22:43:52 trinity kernel: Nvsound: Value 7fff000d
Aug 24 22:43:52 trinity kernel: Nvsound: fragment size 7fff fragnum d
Aug 24 22:43:52 trinity kernel: Nvsound: Nvaudio_release
The nxmixer App runs nice, only some faults when activating Digital output.
Beside that my digital amplifier tells me it has signal on digital input. When I remove nvsound the signal is gone.
Hope somebody could help on this problem. Running in circles at the moment
Kernel 220.127.116.11 (selfmade)
Heres my dmesg-output:
Nvsound: Nvidia Audio Init Module, 22:36:47 Aug 24 2004 version 1.0-0
ACPI: PCI interrupt 0000:00:05.0[A] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:05.0 to 64
Nvsound: NVIDIA nForce2 Controller found at Mem 0xe6000000 and IRQ b
ACPI: PCI interrupt 0000:00:06.0[A] -> GSI 5 (level, low) -> IRQ 5
PCI: Setting latency timer of device 0000:00:06.0 to 64
Nvsound: NVIDIA nForce2 Audio found at IO 0xc400 and 0xc000, IRQ 5
Nvsound: Aci_device dff3cc00 Apu_device dff3b000
Nvsound: DEV MIXER 0 DEV AUDIO 3