View Single Post
Old 09-15-04, 02:57 AM   #1
law
Registered User
 
Join Date: Jul 2004
Posts: 5
Default Gfroce Ti 4200 Twinview wont work

hi,

i have tryed to get my "new" geforce ti 4200 to work with my tv. but only one device is alway active.

if i enable this 2 options only my tv works.

Code:
Option      "MetaModes" "CRT-0: 1280x1024,  TV-0: 640x480"
#       Option      "TVStandard" "PAL-B"
#       Option      "ConnectedMonitor" "CRT, TV"
if i this able them only my monitor works

here is my whole xorg.conf

Code:
# XFree86 4 configuration created by redhat-config-xfree86

Section "ServerLayout"
 Identifier     "single head configuration"
# Identifier     "TwinView"
# Screen      0  "Screen0" 0 0
 Screen         "Screen0"
 InputDevice    "Mouse0" "CorePointer"
 InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"

# RgbPath is the location of the RGB database.  Note, this is the name of the 
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
	RgbPath      "/usr/X11R6/lib/X11/rgb"
	FontPath     "unix/:7100"
EndSection

Section "Module"
	Load  "dbe"
	Load  "extmod"
	Load  "fbdevhw"
	Load  "glx"
# edit by me
#	Load  "dri"
	Load  "GLcore"
	Load  "record"
	Load  "freetype"
	Load  "type1"
	Load  "v4l"
EndSection

Section "InputDevice"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#	Option	"Xleds"		"1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
#	Option	"XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#	Option	"XkbModel"	"pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#	Option	"XkbModel"	"microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#	Option	"XkbLayout"	"de"
# or:
#	Option	"XkbLayout"	"de"
#	Option	"XkbVariant"	"nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#	Option	"XkbOptions"	"ctrl:swapcaps"
# Or if you just want both to be control, use:
#	Option	"XkbOptions"	"ctrl:nocaps"
#
	Identifier  "Keyboard0"
	Driver      "keyboard"

	Option	    "XkbModel" "pc105"
	Option	    "XkbLayout" "de"
	Option	    "XkbVariant" "nodeadkeys"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "IMPS/2"
	Option	    "Device" "/dev/input/mice"
	Option	    "ZAxisMapping" "4 5"
	Option	    "Emulate3Buttons" "no"
EndSection

Section "InputDevice"

# If the normal CorePointer mouse is not a USB mouse then
# this input device can be used in AlwaysCore mode to let you
# also use USB mice at the same time.
	Identifier  "DevInputMice"
	Driver      "mouse"
	Option	    "Protocol" "IMPS/2"
	Option	    "Device" "/dev/input/mice"
	Option	    "ZAxisMapping" "4 5"
	Option	    "Emulate3Buttons" "no"
EndSection

Section "Monitor"
	Identifier   "Monitor0"
	VendorName   "Monitor Vendor"
	ModelName    "Monitor 1280x1024"
	HorizSync    31.5 - 79.0
	VertRefresh  50.0 - 90.0
	Option	    "dpms"
EndSection

Section "Device"

	Driver      "nvidia"
	Identifier  "Videocard0"
#	Driver      "nv"
	VendorName  "Videocard vendor"
	BoardName   "NVIDIA GeForce 4 (generic)"
# edit by me
#	Option	    "TwinView" "true"
#	Option	    "TwinViewOrientation" "Clone"
#	Option	    "SecondMonitorHorizSync" "30-50"
#	Option	    "SecondMonitorVertRefresh" "60"
#	Option	    "SecondConnectedMonitor" "TV"
#	Option      "MetaModes" "CRT-0: 1280x1024,  TV-0: 640x480"
#	Option	    "TVStandard" "PAL-B"
#	Option	    "ConnectedMonitor" "CRT, TV"
#	Option      "TVOutFormat" "COMPOSITE"
#	Option      "NODDC" "true"

EndSection

Section "Screen"
 Identifier "Screen0"
 Device     "Videocard0"
 Monitor    "Monitor0"
 DefaultDepth     24
 SubSection "Display"
  Depth     24
  Modes    "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
 EndSubSection
EndSection

#edit by me
Section "DRI"
 Group        0
 Mode         0666
EndSection
i am using fedora core 2 perhabs someone can help me. or is there an good howto in the inet?
law is offline   Reply With Quote