View Single Post
Old 10-01-04, 07:04 PM   #2
_tf_
scriptfoo warrior
 
_tf_'s Avatar
 
Join Date: Apr 2003
Location: here
Posts: 117
Default Re: Configure xfree / xorg for two X terminals

hi

here is my dualhead-config that worked ok.
maybe you have to change the busid and leave out
the wacom bits.


cheers
lars


Code:
# Xorg configuration

Section "ServerLayout"
	Identifier  "dual head configuration"
	Screen 0        "Screen0"
	Screen 1        "Screen1" rightOf "Screen0"
	InputDevice    "Mouse0"
	InputDevice    "Keyboard0"
	InputDevice    "cursor"
	InputDevice    "wacom"
	InputDevice    "eraser"
EndSection

Section "Files"
	RgbPath     "/usr/X11R6/lib/X11/rgb"
	FontPath     "unix/:7100"
EndSection

Section "Module"
	Load  "dbe"
	Load  "extmod"
	Load  "fbdevhw"
	Load  "glx"
	Load  "record"
	Load  "freetype"
	Load  "type1"
EndSection

Section "InputDevice"
	Identifier  "Keyboard0"
	Driver      "keyboard"
	Option	    "CoreKeyboard"
	Option	    "XkbModel" "pc105"
	Option	    "XkbLayout" "de"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "CorePointer"
	Option	    "Protocol" "IMPS/2"
	Option	    "Device" "/dev/input/mouse1"
	Option	    "ZAxisMapping" "4 5"
	Option	    "Emulate3Buttons" "no"
EndSection

Section "InputDevice"
	Identifier  "cursor"
	Driver      "wacom"
	Option	    "SendCoreEvents"
	Option	    "Device" "/dev/input/event1"
	Option	    "Type" "cursor"
	Option	    "Mode" "relative"
	Option	    "Speed" "3.0"
	Option	    "USB" "on"
	Option	    "Threshold" "10"
EndSection

Section "InputDevice"
	Identifier  "wacom"
	Driver      "wacom"
	Option	    "SendCoreEvents"
	Option	    "Device" "/dev/input/event1"
	Option	    "Type" "stylus"
	Option	    "Mode" "absolute"
	Option	    "USB" "on"
	Option	    "Tilt" "on"
	Option	    "Threshold" "10"
EndSection

Section "InputDevice"
	Identifier  "eraser"
	Driver      "wacom"
	Option	    "SendCoreEvents"
	Option	    "Device" "/dev/input/event1"
	Option	    "Type" "eraser"
	Option	    "Mode" "absolute"
	Option	    "USB" "on"
	Option	    "Tilt" "on"
	Option	    "Threshold" "10"
EndSection

Section "Monitor"
	Identifier   "Monitor0"
	VendorName   "Iiyama"
	ModelName    "Vision Master Pro 510"
	HorizSync    30.0 - 130.0
	VertRefresh  50.0 - 160.0
	Option	     "dpms"
EndSection

Section "Monitor"
	Identifier   "TV0"
	VendorName   "x"
	ModelName    "x TVset"
	HorizSync    30.0 - 50.0
	VertRefresh  60
EndSection

Section "Device"
	Identifier  "Videocard0"
	Driver      "nvidia"
	VendorName  "NVIDIA"
	BoardName   "NVIDIA GeForce4 Ti 4200"
	BusID	     "PCI:3:0:0"
	Screen	     0
	Option	    "NoLogo" "on"
	Option	    "CursorShadow" "on"
	Option	    "CursorShadowAlpha" "30"
	Option	    "RenderAccel" "on"
	#Option	    "NvEmulate" "30"
	#Option	    "TwinView"
	#Option	    "TwinViewOrientation" "clone"
	#Option	    "TVStandard" "PAL-B"
	#Option	    "TVOutFormat" "COMPOSITE"
	#Option	    "SecondMonitorHorizSync" "30-50"
	#Option	    "SecondMonitorVertRefresh" "60"
	#Option	    "MetaModes" "1600x1200,800x600; 1280x1024,800x600; 1024x768,800x600; 800x600,800x600; 640x480,640x480"
EndSection

Section "Device"
	Identifier  "Videocard1"
	Driver      "nvidia"
	VendorName  "NVIDIA"
	BoardName   "NVIDIA GeForce4 Ti 4200"
	BusID	      "PCI:3:0:0"
	Screen	     1
	Option	    "NoLogo" "on"
	Option	    "CursorShadow" "on"
	Option	    "CursorShadowAlpha" "30"
	Option	    "RenderAccel" "on"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Videocard0"
	Monitor     "Monitor0"
	DefaultDepth      24
	SubSection "Display"
		Viewport  0 0
		Depth     24
		Modes    "1600x1200" "1400x1050" "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
	EndSubSection
EndSection

Section "Screen"
	Identifier "Screen1"
	Device     "Videocard1"
	Monitor     "TV0"
	DefaultDepth      24
	SubSection "Display"
		Viewport  1 0
		Depth     24
		Modes    "800x600" "640x480"
	EndSubSection
EndSection
__________________
"My mortgage rate was cut in half after I replied to spam
using Fedora!" raves Bo Battipaglia.
_tf_ is offline   Reply With Quote