View Single Post
Old 11-07-04, 11:55 AM   #76
knick_
Registered User
 
Join Date: Apr 2004
Posts: 3
Default Re: 1.0-6113 for FreeBSD thread

Good evening,

I`m running FreeBSD 5.2.1 XFree86 Version 4.3.0 on Asus P4C800 mothreboard with Asus V9420 /TD (GeForce FX 5200) 128 Mb videocard. A had also problems (system hangs) with previous version of drivers, so I tryied new one. It sad, but they doesn`t work: I`ve got simply black screen, nothing (ctrl+alt+shift+backspace) exept cltr+alt+del helps bring computer back to live. I tryied all values of NvAGP variable, but result is same.

Part of XF86Config:
Quote:
Section "Device"
Identifier "GeForce"
Driver "nv"
VendorName "NVIDIA"
BoardName "GeForce FX 5200"
Option "NvAGP" "3"
VideoRam 131072
EndSection
My dmesg:
Quote:
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2.1-RELEASE #2: Tue Oct 12 00:17:24 MSD 2004
root@tako.mynet.ru:/usr/obj/usr/src/sys/TAKO
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0dbf000.
Preloaded elf module "/boot/kernel/linux.ko" at 0xc0dbf21c.
Preloaded elf module "/boot/kernel/agp.ko" at 0xc0dbf2c8.
Preloaded elf module "/boot/modules/nvidia.ko" at 0xc0dbf370.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0dbf41c.
ACPI APIC Table: <A M I OEMAPIC >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz (2398.86-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf29 Stepping = 9
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE ,CX8,APIC,SEP,MTRR,PGE,MCA,C
MOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,S S,HTT,TM,PBE>
Hyperthreading: 2 logical CPUs
real memory = 536018944 (511 MB)
avail memory = 506806272 (483 MB)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <A M I OEMRSDT > on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 12 entries at 0xc00f5200
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_cpu0: <CPU> port 0x530-0x537 on acpi0
acpi_cpu1: <CPU> port 0x530-0x537 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82875P host to AGP bridge> mem 0xf4000000-0xf7ffffff at device 0.0
on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1: could not get PCI interrupt routing table for \\_SB_.PCI0.P0P1 - AE_NOT_F
OUND
pci1: <ACPI PCI bus> on pcib1
nvidia0: <GeForce FX 5200> mem 0xe0000000-0xe7ffffff,0xfd000000-0xfdffffff irq 1
0 at device 0.0 on pci1
pci0: <serial bus, USB> at device 29.0 (no driver attached)
pci0: <serial bus, USB> at device 29.1 (no driver attached)
pci0: <serial bus, USB> at device 29.2 (no driver attached)
pci0: <serial bus, USB> at device 29.3 (no driver attached)
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
skc0: <3Com 3C940 Gigabit Ethernet> port 0xd800-0xd8ff mem 0xfeafc000-0xfeafffff
irq 22 at device 5.0 on pci2
skc0: 3Com Gigabit LOM (3C940)
sk0: <Marvell Semiconductor, Inc. Yukon> on skc0
sk0: Ethernet address: 00:0e:a6:07:10:6b
miibus0: <MII bus> on sk0
e1000phy0: <Marvell 88E1000 Gigabit PHY> on miibus0
e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH5 UDMA100 controller> port 0xfc00-0xfc0f,0-0x3,0-0x7,0-0x3,0-
0x7 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
atapci1: <Intel ICH5 SATA150 controller> port 0xef90-0xef9f,0xefa8-0xefab,0xefa0
-0xefa7,0xefac-0xefaf,0xefe0-0xefe7 irq 18 at device 31.2 on pci0
atapci1: [MPSAFE]
ata2: at 0xefe0 on atapci1
ata2: [MPSAFE]
ata3: at 0xefa0 on atapci1
ata3: [MPSAFE]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pcm0: <Intel ICH5 (82801EB)> port 0xee80-0xeebf,0xe800-0xe8ff mem 0xfebff000-0xf
ebff0ff,0xfebff400-0xfebff5ff irq 17 at device 31.5 on pci0
pcm0: <Analog Devices AD1985 AC97 Codec>
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0
x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
GEOM: create disk ad0 dp=0xc4c07460
ad0: 38166MB <ST340014A> [77545/16/63] at ata0-master UDMA100
acd0: CDRW <TEAC CD-W552E> at ata1-master PIO4
GEOM: create disk ad4 dp=0xc4c07160
ad4: 114498MB <SAMSUNG SP1213C> [232632/16/63] at ata2-master UDMA100
SMP: AP CPU #1 Launched!
Mounting root from ufs:/dev/ad0s1a
[Cutted Usb information ... ]
XFree86 log is rather long, here is last lines:
Quote:
/* .... */
(II) NVIDIA(0): Virtual screen size determined to be 800 x 600
(--) NVIDIA(0): Display dimensions: (280, 210) mm
(--) NVIDIA(0): DPI set to (72, 72)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.2
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.6
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[b]
[1] 0 0 0xfd000000 - 0xfdffffff (0x1000000) MX[b]
[2] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[b](B)
/* ... and so on up to ...*/
[33] -1 0 0x0000eec0 - 0x0000eeff (0x40) IX[b]E
[34] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[35] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(==) NVIDIA(0): Write-combining range (0xa0000,0x10000) was already clear
(==) NVIDIA(0): Write-combining range (0xfd680000,0x1000) was already clear
(==) NVIDIA(0): Write-combining range (0xfd601000,0x1000) was already clear
(==) NVIDIA(0): Write-combining range (0xfd681000,0x1000) was already clear
(==) NVIDIA(0): Write-combining range (0xfd0c0000,0x1000) was already clear
(==) NVIDIA(0): Write-combining range (0xfd001000,0x1000) was already clear
(==) NVIDIA(0): Write-combining range (0xfd682000,0x1000) was already clear
(==) NVIDIA(0): Write-combining range (0xfd603000,0x1000) was already clear
(==) NVIDIA(0): Write-combining range (0xfd683000,0x1000) was already clear
(II) NVIDIA(0): Setting mode "800x600"
What the problem is?

--
Best regards, knick
knick_ is offline   Reply With Quote