View Single Post
Old 04-06-05, 11:11 AM   #3
jaxxx
Registered User
 
Join Date: Apr 2005
Posts: 6
Default Re: dualhead settings fedora core 3

okay, did all that.
the sgi now appears to the left of the crt which is good.
However, i still cannot get the sgi to go into 1600x1024

follows is my updated xorg.conf, in case that provides any clues

Code:
# Xorg configuration created by system-config-display

Section "ServerLayout"
	Identifier     "Multihead layout"
	Screen      0  "Screen0" 0 0
	Screen      1  "Screen1" LeftOf "Screen0"
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
	Option	    "Xinerama" "on"
	Option	    "Clone" "off"
EndSection

Section "Files"

# RgbPath is the location of the RGB database.  Note, this is the name of the 
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
	RgbPath      "/usr/X11R6/lib/X11/rgb"
	ModulePath   "/usr/X11R6/lib/modules/extensions/nvidia"
	ModulePath   "/usr/X11R6/lib/modules"
	FontPath     "unix/:7100"
EndSection

Section "Module"
	Load  "dbe"
	Load  "extmod"
	Load  "fbdevhw"
	Load  "record"
	Load  "freetype"
	Load  "type1"
	Load  "glx"
EndSection

Section "InputDevice"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#	Option	"Xleds"		"1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
#	Option	"XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#	Option	"XkbModel"	"pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#	Option	"XkbModel"	"microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#	Option	"XkbLayout"	"de"
# or:
#	Option	"XkbLayout"	"de"
#	Option	"XkbVariant"	"nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#	Option	"XkbOptions"	"ctrl:swapcaps"
# Or if you just want both to be control, use:
#	Option	"XkbOptions"	"ctrl:nocaps"
#
	Identifier  "Keyboard0"
	Driver      "kbd"
	Option	    "XkbModel" "pc105"
	Option	    "XkbLayout" "us"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "IMPS/2"
	Option	    "Device" "/dev/input/mice"
	Option	    "ZAxisMapping" "4 5"
	Option	    "Emulate3Buttons" "yes"
EndSection

Section "Monitor"
	Identifier   "Monitor0"
	VendorName   "Monitor Vendor"
	ModelName    "SGI LCD (probably)"
	HorizSync    31.5 - 65.0
	VertRefresh  50.0 - 70.0
	ModeLine     "1600x1024" 136.4 1600 1704 1872 2144 1024 1025 1028 1060 -hsync +vsync
	Option	    "dpms"
# 1600x1024 @ 60.00 Hz (GTF) hsync: 63.60 kHz; pclk: 136.36 MHz
EndSection

Section "Monitor"
	Identifier   "Monitor1"
	VendorName   "Monitor Vendor"
	ModelName    "Dell CRT (probably)"
	HorizSync    31.5 - 48.5
	VertRefresh  40.0 - 70.0
	Option	    "dpms"
EndSection

Section "Device"
	Identifier  "Videocard0"
	Driver      "nvidia"
	VendorName  "Videocard vendor"
	BoardName   "NVIDIA Quadro 4 (generic)"
EndSection

Section "Device"
	Identifier  "Videocard1"
	Driver      "nvidia"
	VendorName  "Videocard Vendor"
	BoardName   "NVIDIA Quadro 4 (generic)"
	BusID       "PCI:1:0:0"
	Screen      1
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Videocard0"
	Monitor    "Monitor0"
	DefaultDepth     24
	SubSection "Display"
		Viewport   0 0
		Depth     24
		Modes    "1600x1024" "1280x1024" "1280x960" "1024x768" "800x600" "640x480"
	EndSubSection
EndSection

Section "Screen"
	Identifier "Screen1"
	Device     "Videocard1"
	Monitor    "Monitor1"
	DefaultDepth     24
	SubSection "Display"
		Viewport   0 0
		Depth     24
		Modes    "1024x768" "800x600" "640x480"
	EndSubSection
EndSection

Section "DRI"
	Group        0
	Mode         0666
EndSection
jaxxx is offline   Reply With Quote