View Single Post
Old 01-14-03, 06:14 PM   #1
vvnnyc
Registered User
 
Join Date: Jan 2003
Location: New York
Posts: 10
Thumbs up need a help ! RH 8.0 kernel 2.4.18-19.8.0 THANKX WHO HELPED ME!!

Hi,
My Kernel is 2.4.18-19.8.0. I am beginer in Linux. After I executed nv _check.sh.txt I got this :
Welcome to the NVidia Driver Installation Checker.
This shell script is meant to help you debug your installation
of the beta NVidia Linux drivers. It is not 100% foolproof.
In particular, you will definitely want to make sure you have
the correct options in your XF86Config to make X work properly.
This script cannot debug your X setup. That being said, it
should prove useful if are having problems with the drivers and
want to check the validity of your driver install.

At no time will this script EVER make changes to your system.
It is simply a diagnostic tool - fixes of any kind will have to
come from you.

Press enter to continue...

OK, the first thing we need to do is make sure your XF86Config file
is set up correctly. In order to do this, I'm first going to try
and find where this file might be...
checking /usr/X11R6/lib/X11/XF86Config...
found
checking /usr/X11R6/etc/X11/XF86Config...
not found
checking /etc/XF86Config...
not found
checking /etc/X11/XF86Config...
found
checking /etc/X11/XF86Config-4...
not found
I'm going to be doing my checking using /etc/X11/XF86Config. If this is not
actually your X config, then quit this script with Ctrl-C, remove
or rename the file, then run this script again.
Press enter to continue

I'm going to check your XF86Config file for the following things:
1) Loading the GLcore and glx modules
2) Specifying the nvidia driver instead of nv

Checking for the Load glx statement...
Load "glx"
It seems to be intact. Now lets see if you're loading the correct
video driver...
Driver "nvidia"
Everything seems fine in your X config file. This is not 100%
guaranteed to be accurate, but lets continue anyway (press enter)...

The next step involves making sure you have the proper files in
the right places, and that the kernel module loaded correctly.
Press enter to begin the test.

First lets make sure you don't have the old modules still present
by mistake...
Checking /usr/X11R6/lib/modules/extensions/libglx.a...
Checking /usr/X11R6/lib/modules/extensions/libGLcore.a...
You don't appear to have any conflicting older drivers. Now lets check
if the new driver files are in place...
Checking /usr/X11R6/lib/modules/drivers/nvidia_drv.o...
Checking /usr/X11R6/lib/modules/extensions/libglx.so...
Checking /usr/lib/libGL.so...
libGLcore.so.1 => /usr/lib/libGLcore.so.1 (0x4005b000)
Checking /usr/lib/libGLcore.so.1...
All the files seem to exist. Now I'm going to see if your kernel
module is loaded correctly...
the NVdriver kernel module does not seem to be loaded. The 3D
drivers will not work without it...please compile it for your
kernel, set it up to insert the module on boot, then run
this script again.
Remember if you are having trouble compiling the module,
try adding -D_LOOSE_KERNEL_NAMES to the Makefile.

My problem is I don't know how I can compile NVdriver kernel module for my kernel and set it up to insert the module on boot.
Somebody help me,plz !
I used
rpmbuild --rebuild VIDIA_kernel-1.0-4191.src.rpm
rpm -ivh usr/src/redhat/RPMS/i386/NVIDIA_kernel-1.0-4191.i386.rpm
rpm -ivh NVIDIA_GLX-1.0-4191.i386.rpm
I can see NVIDIA log screen before I log in.
Thank you so much..

Last edited by vvnnyc; 01-15-03 at 04:14 PM.
vvnnyc is offline   Reply With Quote