View Single Post
Old 08-09-02, 04:01 AM   #1
BlackDogg
Guest
 
Posts: n/a
Default Dual Display with main CRT, and secondary TV-out

Hi folks, I've been trying to get dual display to work, and from the readme.txt file on nvidia's site, I've edited my XFCONFIG-4 file to this, and can not get it to work. I know I left out some of the Horiz, and Vert rates, but I'm not sure what to put for the TV-OUT. If anyone has successfully got this to work with a secondary TV display please share details: Below is my XFCONFIG-4 file:


# File generated by anaconda.

Section "ServerLayout"
Identifier "Anaconda Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"

# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.

RgbPath "/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.

FontPath "unix/:7100"

EndSection

Section "Module"
# Load "GLcore"
Load "dbe"
Load "extmod"
Load "fbdevhw"
# Load "dri"
Load "glx"
Load "record"
Load "freetype"
Load "type1"
EndSection

Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"

# Option "AutoRepeat" "500 5"

# when using XQUEUE, comment out the above line, and uncomment the
# following line
# Option "Protocol" "Xqueue"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"

# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:nocaps"
Option "XkbRules" "xfree86"
Option "XkbModel" "microsoft"
Option "XkbLayout" "us"
Option "XkbVariant" "basic"
#Option "XkbOptions" ""
EndSection

Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "no"
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
HorizSync 30-70
VertRefresh 50-180
Option "dpms"

# -- 1400x1050 --
# 1400x1050 @ 60Hz, 65.8 kHz hsync
Modeline "1400x1050" 129 1400 1464 1656 1960
1050 1051 1054 1100 +HSync +VSync

# 1400x1050 @ 70Hz, 76.8 kHz hsync
Modeline "1400x1050" 151 1400 1464 1656 1960
1050 1051 1054 1100 +HSync +VSync

# 1400x1050 @ 75Hz, 82.3 kHz hsync
Modeline "1400x1050" 162 1400 1464 1656 1960
1050 1051 1054 1100 +HSync +VSync

# 1400x1050 @ 85Hz, 93.2 kHz hsync
Modeline "1400x1050" 184 1400 1464 1656 1960
1050 1051 1054 1100 +HSync +VSync

EndSection

Section "Device"
# no known options
Identifier "NVIDIA GeForce 2 MX (generic)"
# Driver "nv"
Driver "nvidia"
VendorName "NVIDIA GeForce 2 MX (generic)"
BoardName "NVIDIA GeForce 2 MX (generic)"
Option "NoLogo"
Option "DigitalVibrance" "2"

#BusID
EndSection

Section "Screen"
Identifier "Screen0"
Device "NVIDIA GeForce 2 MX (generic)"
Monitor "Monitor0"
DefaultDepth 24

Subsection "Display"
Depth 24
Modes "1280x1024" "1280x1024"
Option "TwinView"
# Option "SecondMonitorHorizSync" "30-50"
# Option "SecondMonitorVertRefresh " "
# Option "MetaModes" " "
Option "TwinViewOrientation" "Clone"
Option "ConnectedMonitor" "CRT, TV"
EndSubsection

EndSection

Section "DRI"
Mode 0666
EndSection

Also can anyone tell me if this looks pretty optimized other than the missing values for secondary twinview display? I had installed RH 7.3, and it detected the card as a G2 MX hybrid, when actually I have a G4/440MX AGP w/TVout. When I updated the drivers, I thought this would be changed, but it didn't. What values should I edit out and replace instead? Other than that it's not a big deal, since it still works fine. I'm thinking the G2 designation is just the description and really has no effect. Since I'm a newb, I'm not sure though. Any comments and assistance greatly appreciated.
  Reply With Quote