View Single Post
Old 08-09-02, 09:23 AM   #9
DJB
Geezer Gamer
 
Join Date: Jul 2002
Posts: 186
Arrow

Folks,

There is a problem with the script for the OGL aniso boost, and the 30.82 drivers. It doesn't matter if you patch the new dll in the install directory, or wait and patch it after you install. Just don't make the mistake of patching your old driver and then installing the new driver.

You will need to modify the [common] section of the patch under Win9x, the Win2K/Xp seems to work fine.

Modification of the Win9x patch is as follows;

Change the existing [common] area to :

[Common]
SrcFile = nvopengl.dll
BakFile = nvopengl.old
HlpFile = AnisoBoosterOGL.rth

;common script for pre-29.xx

;Src0 = 74 00 83 00 28 E1 00 00 00 74 00 80 00 78 01 75 00 83 00 00 00 00 00 00 75 00 F6 00 00 00 00 00 40 75 00
;SCM0 = FF 00 FF 00 FF FF FF FF FF FF 00 FF 00 FF FF FF 00 FF 00 00 00 00 00 FF FF 00 FF 00 00 00 00 00 FF FF 00
;Dst0 = 90 90 83 00 28 E1 00 00 00 74 00 80 00 78 01 75 00 83 00 00 00 00 00 00 75 00 F6 00 00 00 00 00 40 90 90
;DCM0 = 00 00 00 FF 00 00 00 00 00 00 FF 00 FF 00 00 00 FF 00 FF FF FF FF FF 00 00 FF 00 FF FF FF FF FF 00 00 00

;common script for post-29.xx

Src0 = C6 80 FE 00 00 00 00
SCM0 = FF F0 FF FF FF FF FF
Dst0 = 90 90 90 90 90 90 90
Num0 = 2

Src1 = 74 00 83 00 28 E1 00 00 00 74 00 80 00 78 01 75 00 80 00 FE 00 00 00 00 74 00 83 00 00 00 00 00 00 75 00 F6 00 00 00 00 00 40 75 00
SCM1 = FF 00 FF 00 FF FF FF FF FF FF 00 FF 00 FF FF FF 00 FF 00 FF FF FF FF FF FF 00 FF 00 00 00 00 00 FF FF 00 FF 00 00 00 00 00 FF FF 00
Dst1 = 90 90 83 00 28 E1 00 00 00 74 00 80 00 78 01 75 00 80 00 FE 00 00 00 00 74 00 83 00 00 00 00 00 00 75 00 F6 00 00 00 00 00 40 90 90
DCM1 = 00 00 00 FF 00 00 00 00 00 00 FF 00 FF 00 00 00 FF 00 FF 00 00 00 00 00 00 FF 00 FF FF FF FF FF 00 00 FF 00 FF FF FF FF FF 00 00 00




Hope this helps.

DJB

P.S. I con't want to take credit for figuring this out, as this fix is from Unwinder of Rivatuner himself, but I will take credit for passing it on to the nvnews boards.

D
DJB is offline   Reply With Quote