View Single Post
Old 02-01-03, 02:02 AM   #1
jjsimas
Registered User
 
Join Date: Feb 2003
Posts: 10
Default Frustrated: Nvidia Drives and RH8

"startx" fails saying that monitors were found but that none have a usable configuration. their configuration is exactly the same that works with vesa driver. my refresh rates are correct: HorizSync 30-110
VertRefresh 48-170
i made sure pnp os was disabled in my bios, but couldn't find a setting for assigning an IRQ to VGA... any help would be appreciated. here is my latest config file. my monitors are dual sony g410's. and my card is an MSI GF4 Ti 4200 AGP Twin View.

Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "unix/:7100"
EndSection
Section "ServerFlags"
AllowMouseOpenFail
EndSection
Section "InputDevice"
Identifier "Keyboard1"
Driver "Keyboard"
Option "AutoRepeat" "250 30"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/psaux"
EndSection
Section "Module"
Load "dbe"
Load "glx"
Load "extmod"
Load "type1"
Load "freetype"
EndSection
Section "Monitor"
Identifier "MyMonitor"
VendorName "Mitsubisi"
ModelName "Diamond Plus 120u"
HorizSync 30-110
VertRefresh 48-170
EndSection
Section "Device"
Identifier "NV AGP TwinView"
VendorName "nvidia"
Driver "nvidia"
BusID "PCI:1:0:0"
Option "TwinView"
Option "SecondMonitorHorizSync" "30-110"
Option "SecondMonitorVertRefresh" "48-170"
Option "TwinViewOrientation" "RightOf"
Option "MetaModes" "1280x1024,1280x1024; 1024x768,1024x768"
Option "ConnectedMonitor" "crt,crt"
EndSection
Section "Screen"
Identifier "Screen AGP TwinView"
Device "NV AGP TwinView"
Monitor "MyMonitor"
DefaultColorDepth 24
Subsection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x400"
EndSubsection
Subsection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubsection
Subsection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubsection
EndSection
Section "ServerLayout"
Identifier "AGPTwinView"
Screen "Screen AGP TwinView"
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
jjsimas is offline   Reply With Quote