View Single Post
Old 08-29-05, 03:00 PM   #5
count
Registered User
 
Join Date: Jun 2005
Posts: 3
Default Re: Modelines for Apple 30" LCD?

Modeline "1920x1200" 204.39 1920 2056 2264 2608 1200 1201 1204 1212


I also set my monitor section to:

Section "Monitor"
Option "CheckDesktopGeometry"
DisplaySize 640 400 #(This is in mm)
# DisplaySize 495 311 #(Sony PremierPro 24" flatpanel)
HorizSync 31-81
Identifier "Monitor[0]"
ModelName "Apple DISPLAY Cinema"
VendorName "Apple"
VertRefresh 50-65
UseModes "Modes [0]"

Gamma 1.70 1.70 1.70
EndSection

We had to set the gamma high because we were porting over from SGI InfiniteReality Graphics to linux and Nvidia, that was the best setting.

I have used this XFree86 Config on FX-3400s, FX-4400s, FX-3000, FX-4000
and FX-6800GT driving both the Apply 30' display at 1920x1200 and a Sony PremierPro 24" Flat Panel. Only issue I had were with my FX-3000 and FX-4000 I did not get a useable display on the 30" Apple till the X server started.
count is offline   Reply With Quote