View Single Post
Old 02-05-03, 01:51 PM   #1
Pyroman[FO]
Registered User
 
Join Date: Feb 2003
Posts: 5
Default 0: NVRM: rm_init_adapter failed

I was previously using a successful Xinerama setup with two PCI TNT cards, with a Pentium III and i810 chipset, and the "nv" driver. This is on RH 8.0 with the updated kernel. So I install the Nvidia kernel module using srpm and the i386 GLX driver. It compiles and installs just fine, and the kernel module loads just fine. When I start X, one screen comes up fine, however the second screen fails with this in the XF86 error log

(**) NVIDIA(1): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(1): RGB weight 888
(==) NVIDIA(1): Default visual is TrueColor
(==) NVIDIA(1): Using gamma correction (1.0, 1.0, 1.0)
(--) NVIDIA(1): Linear framebuffer at 0xF9000000
(--) NVIDIA(1): MMIO registers at 0xFD000000
(EE) NVIDIA(1): Failed to initialize the NVIDIA kernel module!
(EE) NVIDIA(1): *** Aborting ***

This also shows up in dmesg

0: NVRM: rm_init_adapter failed

If I switch the second card back to the "nv" driver it works. Ive attached my XFconfig and XF error log. BTW, in the XFconfig file, Card2 is the disabled onboard i810.
Attached Files
File Type: txt xf86config_xfree86.0.log.txt (27.8 KB, 209 views)
Pyroman[FO] is offline   Reply With Quote