Originally Posted by balthazor
I have an aopen Aeolus 5700 LE 256 mb AGP card.
I tried some tips from the tutorial using X-bios editor and NiBiTor.
At the moment my FX5700 LE card runs at 2D = 450 mhz/500mhz and 3D = 477 mhz/500mhz Artefact free
The stock speed of this card are 2D=225/200 3D= 250/200
I get 3208 3D marks in 3Dmark2003
Texture Filtering Optimal
Max Anisotropy 4
Vertex Shaders Optimal
Force PS 1.1 in GT2 & GT3 No
Repeat Tests Off
Fixed Frame rate Off
3DMark Score 3208 3DMark Game Tests
And 30295 Aqua Marks [same configuration as above but with V High detail]
Would you help me, getting the last FPS out of my card?
I tried different voltages for 3D 1,29-1,35.
But without gaining any FPS
I donot know how to edit the ram timings table in Hex My ram has an timing of 2ns
I send you my bios file [5700LE.256MB.Rev.01.zip]
My email address is firstname.lastname@example.org
Sorry, but these days I don't get involved with fine tuning of everybody's bioses. And especially when it is for cards I don't have !!
Two things I will say however is:-
There is no reason to ever set 2D core speed higher than 300Mhz !
It appears that you have slightly tightened the 2D and 3D timings in the bios you linked, however you have entered them backwards. Your changed timings are currently at 0301040C000F0009000505020303, but should actually have been entered as 03030205050009000F000C040103. Although if just playing around, then you could also try 0303020404000A0015000A040203 !!
However, also remember that its not important if reducing the timings causes a reduction in max memory overclock, since it is only max performance that actually counts !