View Single Post
Old 01-05-06, 11:01 AM   #1
nmsdrg
Registered User
 
Join Date: Jan 2006
Posts: 2
Question Unable to get 8178 working under FreeBSD 6.0

Hello,

I'm using FreeBSD 6.0 and I installed nvidia-driver from ports. But I can't get it to work. Here are the errors :

(--) PCI:*(0:5:0) nVidia Corporation unknown chipset (0x0242) rev 162, Mem @ 0xf2000000/24, 0xe0000000/28, 0xf3000000/24

later ...

(II) Setting vga for screen 0.
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "NvAGP" "1"
(==) NVIDIA(0): Using HW cursor
(==) NVIDIA(0): Video key set to default value of 0x101fe
(**) NVIDIA(0): Use of NVIDIA internal AGP requested
(--) NVIDIA(0): Linear framebuffer at 0xE0000000
(--) NVIDIA(0): MMIO registers at 0xF2000000
(--) NVIDIA(0): Found 2 CRTCs on board
(II) NVIDIA(0): Supported display device(s): CRT-0
(WW) NVIDIA(0): Failed to determine if system is mobile
(II) NVIDIA(0): Boot display device(s): CRT-0
(WW) NVIDIA(0): Failed to determine chip name
(II) NVIDIA(0): NVIDIA GPU detected as: Unknown
(II) NVIDIA(0): Chip Architecture: 0x40
(II) NVIDIA(0): Chip Implementation: 0x4e
(II) NVIDIA(0): Chip Revision: 0xa2
(--) NVIDIA(0): VideoBIOS: 05.51.22.22.05
(EE) NVIDIA(0): Failed to determine display capabilities
(II) UnloadModule: "nvidia"
(EE) Screen(s) found, but none have a usable configuration.


I have the same kind of error with both a Geforce 2 MX 400 and a Geforce 6100.
Kernel module is succesfully loaded :
nvidia0: <GeForce 6100> mem 0xf2000000-0xf2ffffff,0xe0000000-0xefffffff,0xf3000000-0xf3ffffff irq 16 at device 5.0 on pci0
nvidia0: [GIANT-LOCKED]

does anybody have an idea ?
nmsdrg is offline   Reply With Quote