View Single Post
Old 02-15-06, 08:18 AM   #3
Div2006
Registered User
 
Join Date: Feb 2006
Posts: 4
Default Re: nVida QUADRO4 400NVS FreeBSD 5.4 & For Monitors...

Hi...
Important change in my previous message....
"nvidia-settings" is working now.
This config, listed below, must be working? but not...
-----------config-------------
Code:
Section "Files"
	RgbPath      "/usr/X11R6/lib/X11/rgb"
	ModulePath   "/usr/X11R6/lib/modules"
	FontPath     "/usr/X11R6/lib/X11/fonts/cyrillic/"
	FontPath     "/usr/X11R6/lib/X11/fonts/75dpi/"
	FontPath     "/usr/X11R6/lib/X11/fonts/100dpi/"
	FontPath     "/usr/X11R6/lib/X11/fonts/misc/"
	FontPath     "/usr/X11R6/lib/X11/fonts/TTF/"
EndSection

Section "Module"
	Load  "dbe"
	Load  "extmod"
	Load  "glx"
	Load  "record"
	Load  "xtrap"
	Load  "freetype"
	Load  "type1"
EndSection

Section "InputDevice"
	Identifier  "Keyboard0"
	Driver      "kbd"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "auto"
	Option	    "Device" "/dev/psm0"
EndSection

Section "Monitor"
	Identifier   "Monitor0"
	VendorName   "Monitor Vendor"
	ModelName    "Monitor Model"
EndSection

Section "Monitor"
	Identifier   "Monitor1"
	VendorName   "Monitor Vendor"
	ModelName    "Monitor Model"
EndSection

Section "Device"
	Identifier  "Card0"
	Driver      "nvidia"
	VendorName  "nVidia Corporation"
	BoardName   "NV17GL [Quadro4 200/400 NVS]"
	BusID       "PCI:3:0:0"
	Screen      0
	Option "TwinView"
	Option "TwinViewOrientation"      "RightOf"
	Option "MetaModes"	"1280x1024,1280x1024"
EndSection

Section "Device"
	Identifier  "Card1"
	Driver      "nvidia"
	VendorName  "nVidia Corporation"
	BoardName   "NV17GL [Quadro4 200/400 NVS]"
	BusID       "PCI:3:4:0"
	Screen      1
	Option "TwinView"
	Option "TwinViewOrientation"      "RightOf"
	Option "MetaModes"	"1280x1024,1280x1024"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Card0"
	Monitor    "Monitor0"
	DefaultDepth 24
	SubSection "Display"
		Viewport   0 0
		Depth     24
		Modes     "1280x1024"
	EndSubSection
EndSection

Section "Screen"
	Identifier "Screen1"
	Device     "Card1"
	Monitor    "Monitor1"
	DefaultDepth 24
	SubSection "Display"
		Viewport   0 0
		Depth     24
		Modes     "1280x1024"
	EndSubSection
EndSection

Section "ServerLayout"
	Identifier     "X.org Configured"
	Screen      0 "Screen0" 0 0
	Screen      1 "Screen1" RightOf "Screen0"
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
EndSection
This is log file for X.org.log
Code:
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Feb 14 20:52:48 2006
(==) Using config file: "/usr/X11R6/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Card0"
(**) |-->Screen "Screen2" (1)
(**) |   |-->Monitor "Monitor2"
(**) |   |-->Device "Card1"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) FontPath set to 
"/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/cyrillic/,/usr/
X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(**) ModulePath set to "/usr/X11R6/lib/modules"
-------then is "scanpci" process and his result is below
(II) PCI: 03:00:0: chip 10de,017a card 10de,014c rev a3 class 03,00,00 hdr 00
(II) PCI: 03:04:0: chip 10de,017a card 10de,014c rev a3 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
--------later message (below) is interesting ----------
(--) PCI:*(3:0:0) nVidia Corporation NV17GL [Quadro4 200/400 NVS] rev 163, 
Mem @ 0xfc000000/24, 0xe0000000/27, 0xf0000000/19, BIOS @ xfe000000/17
(--) PCI: (3:4:0) nVidia Corporation NV17GL [Quadro4 200/400 NVS] rev 163, 
Mem @ 0xfd000000/24, 0xfe000000/19
---------why for pci(3:0:0) is "*", but for pci(3:4:0) is no??? May be this is problems and  how this correct?
---------then---------
(II) Primary Device is: PCI 03:00:0
(WW) NVIDIA: No matching Device section for instance (BusID PCI:3:4:0) found
(--) Chipset NVIDIA GPU found
(--) Chipset NVIDIA GPU found
---------Why "No matching Device section"? But section in my config"xorg.conf" for BusID PCI:3:4:0  is present????
-------Then----------
(EE) Screen 1 deleted because of no matching config section.
(II) UnloadModule: "nvidia"
--------
At last, but don't working second chip nVidia in card... Thank's for any information...
Result work "nvidia-settings" is "localhost:0.1" with 2 monitors. This is without working second chip in card QUADRO4 400NVS
Thank's ....
-----------
WRT Sergey
Div2006 is offline   Reply With Quote