Thread: Linux Games
View Single Post
Old 03-02-06, 09:33 AM   #23
seeker
AKA seekermeister
 
seeker's Avatar
 
Join Date: May 2005
Location: At home
Posts: 1,442
Default Re: Linux Games

NightsPaladin,,

Your assumption about my experience is just about right, but it wouldn't matter if it wasn't, because I never take offense to someone trying to help. I scanned over your post, and it appears to indicate the procedure that I have used to date, however I have put it on hold until I know how to deal with the updating of the kernel. Currently, I am using Grub. LiLo was in the past tense. Your statement about adding a menu entry for the kernel, caught my eye. I'm uncertain now, what I did or did not do. Are you referring to the grub/menu.st? Can you give me any specifics on how this is done? I can remember doing alot of editing with the help of a friend, but that help came after the fact, and it did not cure the problem. I have four HDs. as you will see in my signature. XP is on the first SATA partition...E:, and SuSe is on the First partition of the first IDE...J:.

EDIT: I spoke a bit hastily, the XP on the SATAs is corrupt, and I have an archive on the second partition of the second IDE drive D:

Perhaps it would just be better to paste etc/fstab:
Code:
/dev/hdc3                 /                          reiserfs    acl,user_xattr        1 1
/dev/hdd1                /windows/D            vfat        users,gid=users,umask=0002,iocharset=utf8 0 0
/dev/sdb1                /windows/E             ntfs        ro,users,gid=users,umask=0002,nls=utf8 0 0
/dev/hdc2                 swap                    swap       pri=42                0 0
devpts                    /dev/pts                 devpts     mode=0620,gid=5       0 0
proc                       /proc                     proc        defaults              0 0
usbfs                      /proc/bus/usb          usbfs        noauto                0 0
sysfs                      /sys                       sysfs        noauto                0 0
/dev/cdrecorder      /media/cdrecorder    subfs        fs=cdfss,ro,procuid,nosuid,nodev,exec,iocharset=utf8 0 0
/dev/dvdrecorder    /media/dvdrecorder   subfs       fs=cdfss,ro,procuid,nosuid,nodev,exec,iocharset=utf8 0 0
/dev/fd0               /media/floppy           subfs       fs=floppyfss,procuid,nodev,nosuid,sync 0 0
/dev/hdc1             /windows/C             ntfs         ro,users,gid=users,umask=0002,nls=utf8 0 0
Between some failed installations, and the differences in the way that SuSe and XP designates drives and partitions, I tend to get a bit confused. You can ignore the VFAT and NTSF installations on hdd1 and sdb1.
__________________
Rig 1: HAF 922, X2 4400+, Asus A8N32-SLI Deluxe , 4x1GB DDR400, 2x500GB, 1x80GB & 1x250GB + ESATCASE2 w/2x1TB HDs, LG CH10LS20 & GH22LS50, Samsung SH-S202N, Asus Xonar D2X,Creative 5.1, GTX460 SC, FusionHDTV7 Gold RT, Acer X233H, Arris TM520G, Cisco E3000, Scythe Kama, CM RS600 PS,HP 5510v,APC BX1000, XP x64, W7 & Kubuntu 9.10

Rig 2: Antec SX1040BII, A8N-SLI, 2x1GB DDR400, 8800GTS, 1x500GB & 1x1TB HDs, Liteon LH-20AIL and Pioneer DVR-111, Audigy 2 ZS, Creative T20 2.1, Antec 500SP, W7 x64 & XP MCE

Last edited by seeker; 03-02-06 at 01:23 PM.
seeker is offline   Reply With Quote