View Single Post
Old 04-13-06, 09:34 PM   #30
Phil Anderson
Registered User
 
Join Date: Apr 2005
Posts: 5
Default Re: TV-out ceased to work in 8756 release

Hi, After updating to 8756, I can't get my TV to run in 720x576 @50Hz Interlaced. I used to be able to do it with the following config, but now when I run with the existing config (see below), X starts up in 1024x768 with warnings. Any ideas?

Code:
(**) NVIDIA(0): Option "ConnectedMonitor" "TV"
(**) NVIDIA(0): Option "TVStandard" "PAL-N"
(**) NVIDIA(0): Option "TVOutFormat" "SVIDEO"
(**) NVIDIA(0): Enabling RENDER acceleration
(**) NVIDIA(0): Forcing SVIDEO output
(**) NVIDIA(0): TV Standard string: "PAL-N"
(**) NVIDIA(0): ConnectedMonitor string: "TV"
(II) NVIDIA(0): NVIDIA GPU GeForce4 MX 440 with AGP8X at PCI:1:0:0
(--) NVIDIA(0): VideoRAM: 65536 kBytes
(--) NVIDIA(0): VideoBIOS: 04.18.20.13.30
(II) NVIDIA(0): Detected AGP rate: 8X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce4 MX 440 with AGP8X at
(--) NVIDIA(0):     PCI:1:0:0:
(--) NVIDIA(0):     NVIDIA TV Encoder (TV-0)
(--) NVIDIA(0): NVIDIA TV Encoder (TV-0): 350 MHz maximum pixel clock
(--) NVIDIA(0): TV encoder: NVIDIA
(II) NVIDIA(0): Assigned Display Device: TV-0
(WW) NVIDIA(0): No valid modes for "720x576x50i"; removing.
(WW) NVIDIA(0):
(WW) NVIDIA(0): Unable to validate any modes; falling back to the default mode
(WW) NVIDIA(0):     "nvidia-auto-select".
(WW) NVIDIA(0):
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0):     "nvidia-auto-select"
(II) NVIDIA(0): Virtual screen size determined to be 1024 x 768
Code:
Section "Monitor"
        Identifier   "TV"
        ModelName    "TV"
        HorizSync    10.0 - 60.0
        VertRefresh  40.0 - 60.0
        ModeLine     "720x576x50i" 12.6 720 752 792 824 576 589 592 605 interlace
EndSection

Section "Device"
        Identifier  "Videocard0"
        Driver      "nvidia"
        BoardName   "nVidia Corporation NV18 [GeForce4 MX 440 AGP 8x]"
        Option      "ConnectedMonitor" "TV"
        Option      "TVStandard" "PAL-N"
        Option      "TVOutFormat" "SVIDEO"
EndSection

Section "Screen"
        Identifier "Screen0"
        Device     "Videocard0"
        Monitor    "TV"
        DefaultDepth     24
        SubSection "Display"
                Viewport   0 0
                Depth     24
                Modes    "720x576x50i"
        EndSubSection
EndSection
Phil Anderson is offline   Reply With Quote