View Single Post
Old 06-06-06, 01:55 PM   #3
carltonh
Registered User
 
Join Date: May 2006
Posts: 3
Default Re: 2 Nvidia Quadro FX 4500 Solaris 10 x86 Dual Video Mode

Thanks for the reply. I will try out that command to see if it resolves the issue.

I also updated the driver to the one provided on the nvidia website.

I was able to get 3 individual desktops on 2 Nvidia Quadro FX 4500 cards using the xorg.conf file below:

Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
Screen 2 "Screen2" LeftOf "Screen0"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
RgbPath "/usr/X11/lib/X11/rgb"
ModulePath "/usr/X11/lib/modules"
FontPath "/usr/X11/lib/X11/fonts/TrueType/"
FontPath "/usr/X11/lib/X11/fonts/Type1/"
FontPath "/usr/X11/lib/X11/fonts/Type1/sun/"
FontPath "/usr/X11/lib/X11/fonts/F3bitmaps/"
FontPath "/usr/X11/lib/X11/fonts/misc/"
FontPath "/usr/X11/lib/X11/fonts/100dpi/"
FontPath "/usr/X11/lib/X11/fonts/75dpi/"
EndSection

Section "Module"
Load "IA"
Load "Xst"
Load "dbe"
Load "extmod"
Load "record"
Load "xtrap"
Load "glx"
Load "bitstream"
Load "type1"
EndSection

Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
EndSection

Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/mouse"
EndSection

Section "Monitor"
Identifier "Monitor-S0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection

Section "Monitor"
Identifier "Monitor-S1"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection

Section "Monitor"
Identifier "Monitor-S2"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection

Section "Device"
Identifier "Card0"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "Unknown Board"
BusID "PCI:1:0:0"
Screen 0
EndSection

Section "Device"
Identifier "Card1"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "Unknown Board"
BusID "PCI:1:0:0"
Screen 1
EndSection

Section "Device"
Identifier "Card2"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "Unknown Board"
BusID "PCI:2:0:0"
Screen 0
EndSection


Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor-S0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x1024"
EndSubSection
EndSection

Section "Screen"
Identifier "Screen1"
Device "Card1"
Monitor "Monitor-S1"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x1024"
EndSubSection
EndSection

Section "Screen"
Identifier "Screen2"
Device "Card2"
Monitor "Monitor-S2"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x1024"
EndSubSection
EndSection
carltonh is offline   Reply With Quote