View Single Post
Old 08-10-06, 09:11 PM   #1
eisregen
Registered User
 
Join Date: Dec 2005
Posts: 4
Unhappy TwinView CRT,DFP; HorizSync + VertRefresh ?

Hi =)

I have a TwinView setup with a CRT as first display and a 19" TFT as second (HANNS G JC 198D).
It worked somewhat fine when I had both connected via VGA.
After I connected the TFT via DVI cable and changed the xorg.conf option from "ConnectedMonitor" "crt,crt" to "ConnectedMonitor" "crt,dfp" the Horizontal Sync and Vertical Refresh ranges couldn't be determined with EDID and the box hardlocked when starting X. The X config I used is attached.
Unfortuanately neither the website nor the manual specifies the HorizSync + VertRefresh ranges, and I don't know if it's possible to calculate them from the following table:
Supporting Timing Modes
VGA 720 x 400 @ 70Hz
VGA 640 x 480 @ 60Hz
MAC 640 x 480 @ 67Hz
VESA 640 x 480 @ 75Hz
VESA 800 x 600 @ 56Hz
VESA 800 x 600 @ 60Hz
VESA 800 x 600 @ 72Hz
VESA 800 x 600 @ 75Hz
MAC 832 x 624 @ 75Hz
VESA 1024 x 768 @ 60Hz
VESA 1024 x 768 @ 70Hz
VESA 1024 x 768 @ 75Hz
VESA 1280 x 1024 @ 60Hz
VESA 1280 x 1024 @ 75Hz

Can somebody make the required values up from this ?

(the card is a XpertVision 7900GT Sonic 512MB)

Thanks in advance =)
Attached Files
File Type: log Xorg.0.log (39.8 KB, 167 views)
File Type: zip nvidia-bug-report.log.zip (24.5 KB, 137 views)
File Type: txt xorg.conf.twinview.txt (13.1 KB, 217 views)
eisregen is offline   Reply With Quote