View Single Post
Old 09-02-06, 06:30 PM   #9
SysGhost
Registered User
 
Join Date: Aug 2006
Posts: 22
Default Re: Black stripe on the right side, using Flatpanel with analog VGA

At last... played around a bit and finally fixed it by adding a few options in xorg.conf:


First disable UseEDID in section "Device"
Code:
Option "UseEDID" "false"
Then manually tell the monitor what modelines I had when it worked before (extracted them with xvidtune with the old "working" drivers, this is done in section "Monitor"
Code:
ModeLine "1280x1024"   135.00   1280 1296 1440 1688   1024 1025 1028 1066 +hsync +vsync
ModeLine "1024x768"     78.80   1024 1040 1136 1312    768  769  772  800 +hsync +vsync
ModeLine "800x600"      49.50    800  816  896 1056    600  601  604  625 +hsync +vsync
ModeLine "640x480"      31.50    640  656  720  840    480  481  484  500 -hsync -vsync
It seems the new drivers are detecting the EDID from my Benq FP931 wrong somehow, and the old drivers detect the EDID correctly.
SysGhost is offline   Reply With Quote