Go Back   nV News Forums > Linux Support Forums > General Linux

Newegg Daily Deals

Reply
 
Thread Tools
Old 05-08-03, 01:26 PM   #1
K_os_2003
Registered User
 
Join Date: May 2003
Posts: 4
Default Slackware 9 and NForce 2

Hello,

I have an A7N8X-DLX board and I am running Slackware 9 with a 2.4.20 kernel.

I have followed all the instrctions in the NForce driver installation instructions but when I use "modprobe nvaudio" I get the following : (modprobe -a produces the same output)

Quote:
root@bernie:~# modprobe nvaudio
/lib/modules/2.4.20/kernel/drivers/sound/nvaudio.o: init_module: No such device
/lib/modules/2.4.20/kernel/drivers/sound/nvaudio.o: Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.20/kernel/drivers/sound/nvaudio.o: insmod /lib/modules/2.4.20/kernel/drivers/sound/nvaudio.o failed
/lib/modules/2.4.20/kernel/drivers/sound/nvaudio.o: insmod nvaudio failed
Using modprobe with nvnet and usb-ohci works fine though. I can use my network card without problems and my usb joystick is detected.

Here is the output of depmod -a :

Quote:
root@bernie:~# depmod -a
depmod: *** Unresolved symbols in /lib/modules/2.4.20/kernel/drivers/net/nvnet.o
depmod: *** Unresolved symbols in /lib/modules/2.4.20/kernel/drivers/sound/nvaudio.o
My modules.conf file :
Quote:
root@bernie:~# cat /etc/modules.conf
alias char-major-195 nvidia
alias eth0 nvnet
alias sound-slot-0 nvaudio
alias usb-interface usb-ohci
Does anyone have a clue of what might cause this?

Also, I am right in thinking that there is no way to get all sound converted to dolby digital under Linux? Are there any parameters/switches that can be passed to the nVidia audio module?

Thanks!
K_os_2003 is offline   Reply With Quote
Old 05-08-03, 02:03 PM   #2
K_os_2003
Registered User
 
Join Date: May 2003
Posts: 4
Default update...

I forgot to mention this :

I first did a make install from a mounted vfat partition and proceded with the required modprobes. After doing this, my sound worked fine but I was still getting the errors mentionned above.

I then did make uninstall thinking that the vfat mounted partition might have screwed up something.

After that, I extracted the tar file on my ext2 linux partition and redid make install. This is where I am now and getting the errors above.
K_os_2003 is offline   Reply With Quote
Old 05-14-03, 06:39 AM   #3
galaxor
ATI Radeon, A7N8X-Dx
 
Join Date: Apr 2003
Location: Germany
Posts: 20
Default

Hi,

rebuild your Kernel (preferably 2.4.21-rc2, because of the 3com NIC and the (now working) AGPgart) and include a sound-module for "Intel ICH (i8xx), SiS 7012, NVidia nForce Audio or AMD 768/811x".

after booting the new kernel compile the nvaudio and nvnet modules and use "sound-slot-0" as an alias for your nvaudio-module (/etc/modules.conf).
galaxor is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


Similar Threads
Thread Thread Starter Forum Replies Last Post
nForce + RedHat 7.3 Success Story rtz NVIDIA Linux 47 02-15-03 02:20 AM
Nforce AGP & unreal 2003 nichos NVIDIA Linux 1 10-18-02 05:21 PM
Keep K7S5A or Upgrade To Nforce MB? Grechie CPUs, Motherboards And Memory 5 10-06-02 02:28 PM
Newby question about nforce.... superconti NVIDIA Linux 2 09-07-02 11:46 PM
new nforce driver!! 1.12!! frenchy2k1 CPUs, Motherboards And Memory 9 08-27-02 01:09 AM

All times are GMT -5. The time now is 11:56 AM.


Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright 1998 - 2014, nV News.