|05-13-03, 02:33 PM||#1|
Join Date: Sep 2002
8RDA+ + RH9 + Networking
I downloaded NVIDIA_nforce-1.0-0256.src.rpm and done rpmbuild --rebuild on it. It reported a few errors but this was on the audio section and as I've got an Audigy card weren't bothered about this.
I then changed to /usr/src/redhat/BUILD/nforce/nvnet and ran make (nothing to do) then make install and this reported ok.
I then found it had created a nvnet.o file in /lib/modules/2.4.20-8/kernel/drivers/net and on a reboot of system it detected the card and wanted to install it, so let it and now got my network working.
The only other thing I noticed was that it wanted to remove my firewire port which I let it
It also created a file called nvnet.gz, do i just keep this file to make the driver in future or do i keep the nvnet.o file
|05-16-03, 09:20 PM||#2|
Join Date: May 2003
I have the same motherboard just like yours, but i can install the ethernet card.
I have try, on the konsole, the command "make", on the tar file, and it have give me the following error:
[root@localhost nforce]# make
make -C nvnet
make: Entering directory `/home/feiticeiro/Desktop/Claudio/nforce/nvnet'
cc -c -DLINUX -DMODULE -DEXPORT_SYMTAB -D__KERNEL__ -O -Wstrict-prototypes -DCONFIG_PM -fno-strict-aliasing -mpreferred-stack-boundary=2 -march=i686 -falign-functions=4 -DMODULE -I/usr/src/linux-2.4.21/include nvnet.c
make: cc: Command not found
make: *** [nvnet.o] Error 127
make: Leaving directory `/home/feiticeiro/Desktop/Claudio/nforce/nvnet'
make: *** [nvnet_make] Error 2
I have thy with the rpm file so, but it says the the command "rpmrebuild" it's not valid...
Have any clue about this to help me?
|Thread||Thread Starter||Forum||Replies||Last Post|
|HPCwire: Myricom, Emulex Take Aim at High Performance #Networking http://t.co/4JuYMJU||News||Archived News Items||0||05-10-12 08:10 AM|
|Help Networking Problem||Essense||Microsoft Windows XP And Vista||6||10-16-02 10:09 AM|
|New forum idea: Networking ?||volt||Feedback Forum||8||07-29-02 05:11 PM|