"hsync out of range" for every resolution

fikiz · 06-10-07, 09:52 AM

Hi all!
I'm opening a new topic 'cause I'm asking for a different thing. Sorry if I'm going to be annoying :-)

I'm running a GeForce 7100GS, with Gentoo Linux 2.6.20-r8.

I tried a lot of xorg configurations, but the only costant thing I get while starting X is this part written in Xorg.0.log:

Code:

(II) NV(0): Monitor0: Using hsync range of 28.00-33.00 kHz
(II) NV(0): Monitor0: Using vrefresh range of 43.00-72.00 Hz
(II) NV(0): Estimated virtual size for aspect ratio 1.2593 is 1280x1024
(II) NV(0): Clock range:  12.00 to 400.00 MHz
(II) NV(0): Not using default mode "640x350" (hsync out of range)
(II) NV(0): Not using default mode "320x175" (hsync out of range)
(II) NV(0): Not using default mode "640x400" (hsync out of range)
(II) NV(0): Not using default mode "320x200" (hsync out of range)
(II) NV(0): Not using default mode "720x400" (hsync out of range)
(II) NV(0): Not using default mode "360x200" (hsync out of range)
(II) NV(0): Not using default mode "640x480" (hsync out of range)
(II) NV(0): Not using default mode "320x240" (hsync out of range)
(II) NV(0): Not using default mode "640x480" (hsync out of range)
(II) NV(0): Not using default mode "320x240" (hsync out of range)
(II) NV(0): Not using default mode "640x480" (hsync out of range)
(II) NV(0): Not using default mode "320x240" (hsync out of range)
(II) NV(0): Not using default mode "800x600" (hsync out of range)
(II) NV(0): Not using default mode "400x300" (hsync out of range)
(II) NV(0): Not using default mode "800x600" (hsync out of range)
(II) NV(0): Not using default mode "400x300" (hsync out of range)
(II) NV(0): Not using default mode "800x600" (hsync out of range)
(II) NV(0): Not using default mode "400x300" (hsync out of range)
(II) NV(0): Not using default mode "800x600" (hsync out of range)
(II) NV(0): Not using default mode "400x300" (hsync out of range)
(II) NV(0): Not using default mode "800x600" (hsync out of range)
(II) NV(0): Not using default mode "400x300" (hsync out of range)
(II) NV(0): Not using default mode "1024x768" (hsync out of range)
(II) NV(0): Not using default mode "512x384" (hsync out of range)
(II) NV(0): Not using default mode "1024x768" (hsync out of range)
(II) NV(0): Not using default mode "512x384" (hsync out of range)
(II) NV(0): Not using default mode "1024x768" (hsync out of range)
(II) NV(0): Not using default mode "512x384" (hsync out of range)
(II) NV(0): Not using default mode "1024x768" (hsync out of range)
(II) NV(0): Not using default mode "512x384" (hsync out of range)
(II) NV(0): Not using default mode "1024x768" (hsync out of range)
(II) NV(0): Not using default mode "512x384" (hsync out of range)
(II) NV(0): Not using default mode "1152x864" (hsync out of range)
(II) NV(0): Not using default mode "576x432" (hsync out of range)
(II) NV(0): Not using default mode "1280x960" (hsync out of range)
(II) NV(0): Not using default mode "640x480" (hsync out of range)
(II) NV(0): Not using default mode "1280x960" (hsync out of range)
(II) NV(0): Not using default mode "640x480" (hsync out of range)
(II) NV(0): Not using default mode "1280x1024" (hsync out of range)
(II) NV(0): Not using default mode "640x512" (hsync out of range)
(II) NV(0): Not using default mode "1280x1024" (hsync out of range)
(II) NV(0): Not using default mode "640x512" (hsync out of range)
(II) NV(0): Not using default mode "1280x1024" (hsync out of range)
(II) NV(0): Not using default mode "640x512" (hsync out of range)
(II) NV(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) NV(0): Not using default mode "800x600" (hsync out of range)
(II) NV(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) NV(0): Not using default mode "800x600" (hsync out of range)
(II) NV(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) NV(0): Not using default mode "800x600" (hsync out of range)
(II) NV(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) NV(0): Not using default mode "800x600" (hsync out of range)
(II) NV(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) NV(0): Not using default mode "800x600" (hsync out of range)
(II) NV(0): Not using default mode "1792x1344" (width too large for virtual size)
(II) NV(0): Not using default mode "896x672" (hsync out of range)
(II) NV(0): Not using default mode "1792x1344" (width too large for virtual size)
(II) NV(0): Not using default mode "896x672" (hsync out of range)
(II) NV(0): Not using default mode "1856x1392" (width too large for virtual size)
(II) NV(0): Not using default mode "928x696" (hsync out of range)
(II) NV(0): Not using default mode "1856x1392" (width too large for virtual size)
(II) NV(0): Not using default mode "928x696" (hsync out of range)
(II) NV(0): Not using default mode "1920x1440" (width too large for virtual size)
(II) NV(0): Not using default mode "960x720" (hsync out of range)
(II) NV(0): Not using default mode "1920x1440" (width too large for virtual size)
(II) NV(0): Not using default mode "960x720" (hsync out of range)
(II) NV(0): Not using default mode "832x624" (hsync out of range)
(II) NV(0): Not using default mode "416x312" (hsync out of range)
(II) NV(0): Not using default mode "1152x768" (hsync out of range)
(II) NV(0): Not using default mode "576x384" (hsync out of range)
(II) NV(0): Not using default mode "1400x1050" (width too large for virtual size)
(II) NV(0): Not using default mode "700x525" (hsync out of range)
(II) NV(0): Not using default mode "1400x1050" (width too large for virtual size)
(II) NV(0): Not using default mode "700x525" (hsync out of range)
(II) NV(0): Not using default mode "1600x1024" (width too large for virtual size)
(II) NV(0): Not using default mode "800x512" (hsync out of range)
(II) NV(0): Not using default mode "1920x1440" (width too large for virtual size)
(II) NV(0): Not using default mode "960x720" (hsync out of range)
(II) NV(0): Not using default mode "2048x1536" (width too large for virtual size)
(II) NV(0): Not using default mode "1024x768" (hsync out of range)
(II) NV(0): Not using default mode "2048x1536" (width too large for virtual size)
(II) NV(0): Not using default mode "1024x768" (hsync out of range)
(II) NV(0): Not using default mode "2048x1536" (width too large for virtual size)
(II) NV(0): Not using default mode "1024x768" (hsync out of range)
(II) NV(0): Not using driver mode "800x600" (hsync out of range)
(II) NV(0): Not using driver mode "640x480" (hsync out of range)
(II) NV(0): Not using driver mode "1280x1024" (hsync out of range)
(II) NV(0): Not using driver mode "1024x768" (hsync out of range)
(II) NV(0): Not using driver mode "1024x768" (hsync out of range)
(II) NV(0): Not using driver mode "832x624" (hsync out of range)
(II) NV(0): Not using driver mode "800x600" (hsync out of range)
(II) NV(0): Not using driver mode "1152x864" (hsync out of range)
(II) NV(0): Not using driver mode "640x480" (hsync out of range)
(II) NV(0): Not using driver mode "800x600" (hsync out of range)
(II) NV(0): Not using driver mode "1024x768" (hsync out of range)
(II) NV(0): Not using driver mode "1280x1024" (hsync out of range)
(II) NV(0): Not using driver mode "1280x1024" (hsync out of range)
(WW) NV(0): Shrinking virtual size estimate from 1280x1024 to 640x480

For some kind of reason X dislikes my HSync and VertRefresh values, it
says it is using these values:

Code:

(II) NV(0): Monitor0: Using hsync range of 28.00-33.00 kHz
(II) NV(0): Monitor0: Using vrefresh range of 43.00-72.00 Hz

but in xorg.conf i wrote:

Code:

Section "Monitor"
        Identifier      "Monitor0"
        Option          "DPMS"
        HorizSync       30.0-82.0
        VertRefresh     50.0-75.0
EndSection

the best resolution I can obtain is 640x480. I need only 1024x768!!!
I wasn't able to get useful information about this behaviour. Any ideas?

thanks.

**AaronP** · 06-10-07, 12:31 PM

Please post the complete log along with your xorg.conf file.

fikiz · 06-10-07, 12:49 PM

my Xorg.0.log and xorg.conf.

Thank you for your help!

**AaronP** · 06-10-07, 01:26 PM

From your log:

Code:

(==) Log file: "/var/log/Xorg.0.log", Time: Sun Jun 10 18:03:21 2007
(==) Using config file: "/root/xorg.conf"
(==) ServerLayout "XAC Configured"

This is probably not what you want.

fikiz · 06-10-07, 06:11 PM

What a stupid... you're right!!!

Now it reads the right xorg.conf, and it seems to work...

thank you

**AaronP** · 06-11-07, 12:19 AM

Yeah, isn't that the greatest feature ever?

ViN86 · 06-11-07, 08:22 AM

Quote:

Originally Posted by AaronP

From your log:

Code:

(==) Log file: "/var/log/Xorg.0.log", Time: Sun Jun 10 18:03:21 2007
(==) Using config file: "/root/xorg.conf"
(==) ServerLayout "XAC Configured"

This is probably not what you want.

what the hell? is that a default setting or something? why would it do that?

i was just about to tell you to check the location of your config file. well, good to see it got fixed

gbil · 06-11-07, 08:57 AM

I think this is hard-coded in xorg, first to check for /root/xorg.conf file and then other locations. Happened to me also a long time ago

06-10-07, 12:31 PM	#2
AaronP NVIDIA Corporation Join Date: Mar 2005 Posts: 2,487	Re: "hsync out of range" for every resolution Please post the complete log along with your xorg.conf file.

06-10-07, 01:26 PM	#4
AaronP NVIDIA Corporation Join Date: Mar 2005 Posts: 2,487	Re: "hsync out of range" for every resolution From your log: Code: (==) Log file: "/var/log/Xorg.0.log", Time: Sun Jun 10 18:03:21 2007 (==) Using config file: "/root/xorg.conf" (==) ServerLayout "XAC Configured" This is probably not what you want.

06-10-07, 06:11 PM	#5
fikiz Registered User Join Date: Jun 2007 Posts: 4	Re: "hsync out of range" for every resolution What a stupid... you're right!!! Now it reads the right xorg.conf, and it seems to work... thank you

06-11-07, 12:19 AM	#6
AaronP NVIDIA Corporation Join Date: Mar 2005 Posts: 2,487	Re: "hsync out of range" for every resolution Yeah, isn't that the greatest feature ever?

06-11-07, 08:57 AM	#8
gbil Registered User Join Date: Mar 2006 Posts: 272	Re: "hsync out of range" for every resolution I think this is hard-coded in xorg, first to check for /root/xorg.conf file and then other locations. Happened to me also a long time ago

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
8800 GT and Ubuntu - Plymouth low resolution	legluondunet	NVIDIA Linux	3	06-24-12 03:22 PM
Opinions on 1280x1024 resolution	skipparoo	NVIDIA GeForce 7, 8, And 9 Series	103	06-22-12 11:38 PM
What resolution do you all run Unreal2003 retail version at with all details on max.?	imtim83	Gaming Central	9	10-04-02 10:17 AM
30.82 and 40.41 resolution + monitor OSD.	Max3D	NVIDIA Windows Graphics Drivers	2	09-05-02 02:15 AM
Resolution	MichaelZ	NVIDIA Linux	7	08-07-02 06:18 PM