Go Back   nV News Forums > Linux Support Forums > General Linux

Newegg Daily Deals

Reply
 
Thread Tools
Old 05-23-03, 03:37 AM   #13
yurka
Registered User
 
Join Date: May 2003
Posts: 2
Send a message via ICQ to yurka
Default

Hi there.
I have overcamed that problem by downloading new nforce driver from http://download.nvidia.com/XFree86/n....0-0256.tar.gz
Then make; make install; insmod nvnet; /etc/init.d/netwrok start

It should work. At least it worked for my configuration.
Good luck!
yurka is offline   Reply With Quote
Old 05-23-03, 11:49 AM   #14
DeVioSiTY
Registered User
 
Join Date: May 2003
Posts: 6
Default

That is the only version I have tried, since I cannot find any version older or newer than that one. Still doesn't work with the same error. Thanks anyway. I'm glad to hear that it at least works for you.

I think my real problem is that I need some sort of kernel patch for their driver.
DeVioSiTY is offline   Reply With Quote
Old 05-24-03, 11:49 PM   #15
Adrac
Registered User
 
Join Date: May 2003
Posts: 4
Default

Quote:
cc -c -Wall -DLINUX -DMODULE -DEXPORT_SYMTAB -D__KERNEL__ -O -Wstrict-prototypes -DCONFIG_PM -fno-strict-aliasing -mpreferred-stack-boundary=2 -march=i686 -falign-functions=4 -DMODULE -I/usr/src/linux-2.4.21/include nvnet.c
In file included from nvnet.h:20,
Looks like this is being compiled as a module (the -DMODULE directive). Since this isn't part of the standard kernel source tree, I expect a fair amount of work would be required to compile this into the kernel if it is even possible. In the past with binary only releases and other such things, I found it was just simpler to compile as many things into my kernel that I wanted and turn on module support for any third party things.
Adrac is offline   Reply With Quote
Old 06-03-03, 10:08 PM   #16
bromod
Shuttle SN41G2 - AMD 2500
 
bromod's Avatar
 
Join Date: May 2003
Posts: 13
Lightbulb

I have the remap_page_range_R2baf18f2 error fixed, see my thread:

http://www.nvnews.net/vbulletin/show...threadid=11630

titled: error: remap_page_range_R2baf18f2


Last edited by bromod; 06-03-03 at 10:18 PM.
bromod is offline   Reply With Quote
Old 06-04-03, 11:52 PM   #17
tkloppel
Registered User
 
Join Date: Apr 2003
Posts: 18
Default Same issue

In redhat 9, getting the same issue as everyone else... tried make, make install on both 0248, and 0256 tars, got the same error each time.

Here is the ENTIRE error...

# make
make -C nvnet
make[1]: Entering directory `/root/Downloads/Setup/nforce/nforce/nvnet'
cc -c -Wall -DLINUX -DMODULE -DEXPORT_SYMTAB -D__KERNEL__ -O -Wstrict-prototypes -DCONFIG_PM -fno-strict-aliasing -mpreferred-stack-boundary=2 -march=i686 -malign-functions=4 -DMODULE -I/lib/modules/2.4.20-8/build/include nvnet.c
make[1]: cc: Command not found
make[1]: *** [nvnet.o] Error 127
make[1]: Leaving directory `/root/Downloads/Setup/nforce/nforce/nvnet'
make: *** [nvnet_make] Error 2

any ideas at all are appreciated :-)
tkloppel is offline   Reply With Quote
Old 06-05-03, 01:17 AM   #18
tkloppel
Registered User
 
Join Date: Apr 2003
Posts: 18
Default Notes...

If you didnt have gcc installed this is one of the problems.... After i installed gcc, i got a whole new set of errors.. very long list of them infact... anyways...

im trying to figure out how to get libc6-dev installed... on another forum this appears to have fixed the problem for another person... think that may fix it, but i cant find it heh...
tkloppel is offline   Reply With Quote
Old 06-05-03, 02:08 AM   #19
bromod
Shuttle SN41G2 - AMD 2500
 
bromod's Avatar
 
Join Date: May 2003
Posts: 13
Default

yes, definitly looks like gcc is not installed in that post.

Also if you are doing rebuilds, you will need to install the dev rpms to get it to build, and everything that it depends upon.

Get the dev rpm that is on you CDROM, and then do something like this...

rpm -ivh glibc-devel-2.3.2-11.9.i386.rpm

and/or/whatever

rpm -ivh libstdc++-devel-3.2.2-5.i386.rpm

Tell me a bit more on what you are looking for....

I did these steps...

root @ sun 14 > locate libc6
/usr/lib/libstdc++-2-libc6.1-1-2.9.0.so
/usr/lib/libstdc++-libc6.1-1.so.2
/usr/lib/libstdc++-3-libc6.2-2-2.10.0.so
/usr/lib/libstdc++-libc6.2-2.so.3

root @ sun 16 > rpm -qf /usr/lib/libstdc++-2-libc6.1-1-2.9.0.so
compat-libstdc++-7.3-2.96.118

root @ sun 17 > locate libstd | grep rpm
/rh9/RedHat/RPMS/libstdc++-3.2.2-5.i386.rpm
/rh9/RedHat/RPMS/libstdc++-devel-3.2.2-5.i386.rpm
/rh9/RedHat/RPMS/compat-libstdc++-7.3-2.96.118.i386.rpm
/rh9/RedHat/RPMS/compat-libstdc++-devel-7.3-2.96.118.i386.rpm

where rh9 is my local directory where I manually copied the RPMs.
bromod is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 10:24 PM.


Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright 1998 - 2014, nV News.