11-09-07, 11:33 AM
|
#1 | |
|
Registered User
Join Date: Nov 2007
Posts: 5
|
Cant run my RAM at full speed
I recently built a Q6600 system using an Asus P5K-VM mobo. I installed Kingston PC8500 RAM 1066 Speed. (I dont have the part number right now but it is listed in the Mobo manual as approved RAM and alink to it is here ) I have the FSB set to 333 OC'ing it to 3.0Ghz. The Dram Frequency is set to auto.. When I run CPU-Z it tells me the ram is PC6400 (800 Mhz). When I hard code the Dram Frequency to 1066 (as per the motherboard manual ) the system will not boot and it tells me "Overclocking Failed".. I'm a bit confused here.. Will this RAM not work when the FSB is set to 333 and the DRAM Freq set to 1066??
|
|
|
|
|
11-09-07, 12:01 PM
|
#2 | |
|
Single Male
Join Date: Dec 2004
Posts: 2,115
|
Re: Cant run my RAM at full speed
I'll tell you what you can give me the ram and I'll let you know if it works or not! Just ship it to the PO box...
 Drop the cpu to default 266 and set the ram to 1066 and see if it boots before you try running it with a OC
__________________
 ---Q6600 @3.45 430FSB - P5K Deluxe--- ---1066 5-4-4-12 PL6! - 257 GTX OCed--- ---ASUS Xonar DX - Dell 2407 24 LCD--- |
|
|
|
|
 |
| Thread Tools | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Need for Speed: Most Wanted returns with open-world urban racing | News | Latest Tech And Game Headlines | 0 | 06-04-12 07:30 PM |
| German ISP claims to deliver 4.7Gbps download speed in field test | News | Latest Tech And Game Headlines | 0 | 06-01-12 05:50 AM |
| Getting the proprietary nvidia driver to run with Debian 3.0 r0 (woody) | Katchina404 | NVIDIA Linux | 9 | 01-12-03 08:49 AM |
| Program to Identify DDR RAM modules speeds | MUYA | General Hardware | 4 | 10-11-02 11:41 AM |
| Gainward GeForce4 Ti 4200 and overclocked AGP | Prefect47 | NVIDIA GeForce 7, 8, And 9 Series | 6 | 09-16-02 03:50 PM |
