8600 gts tv out resolution

[hairy_testicles]

i had a evga 7600 gt, but the caps blew, so i upgraded to a evga 8600 gts. tv out worked great on the 7600. being the same maker, and just a small upgrade i figured i would not need to change anything in my xorg.conf as far as tv out goes.(yes i remade the nvidia driver module just in case)

my problem is the desktop its showing(seperate screen), is larger than the tvs viewing screen, like i have the resolution set too high, i change it down from 1024x768 to 800x600, and the icons grow, but are still hanging off the screen.

nvidia version 180.18
here is my xorg.conf

Section "ServerLayout"
    Identifier     "X.org Configured"
    Screen      0  "Screen0" 0 0
    Screen      1  "Screen1" RightOf "Screen0"
    InputDevice    "Mouse0" "CorePointer"
    InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
    RgbPath         "/usr/share/X11/rgb"
    ModulePath      "/usr/lib/xorg/modules"
    FontPath        "/usr/share/fonts/TTF"
    FontPath        "/usr/share/fonts/OTF"
    FontPath        "/usr/share/fonts/Type1"
    FontPath        "/usr/share/fonts/misc"
    FontPath        "/usr/share/fonts/75dpi/:unscaled"
EndSection

Section "Module"
    Load           "glx"
    Load           "extmod"
    Load           "xtrap"
    Load           "record"
    Load           "dbe"
    Load           "freetype"
    Load           "type1"
EndSection

Section "ServerFlags"
    Option         "Xinerama" "0"
EndSection

Section "InputDevice"
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "InputDevice"
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/input/mice"
    Option         "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "Acer AL2016W"
    HorizSync       31.0 - 84.0
    VertRefresh     56.0 - 86.0
    Option         "DPMS"
EndSection

Section "Monitor"
    Identifier     "Monitor1"
    VendorName     "Unknown"
    ModelName      "TV-0"
    HorizSync       31.0 - 84.0
    VertRefresh     56.0 - 86.0
EndSection

Section "Device"
    Identifier     "Card0"
    Driver         "nvidia"
    VendorName     "nVidia Corporation"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce 8600 GTS"
    BusID          "PCI:2:0:0"
    Screen          0
EndSection

Section "Device"
    Identifier     "Device1"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce 8600 GTS"
    BusID          "PCI:2:0:0"
    Screen          1
EndSection
Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "NoLogo" "True"
    Option         "TwinView" "0"
    Option         "TwinViewXineramaInfoOrder" "CRT-0"
    Option         "metamodes" "CRT: 1680x1050 +0+0"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen1"
    Device         "Device1"
    Monitor        "Monitor1"
    DefaultDepth    24
    Option         "NoLogo" "True"
    Option         "TVStandard" "HD480i"
    Option         "TVOutFormat" "COMPONENT"
    Option         "ConnectedMonitor" "TV"
    Option         "TwinView" "0"
    Option         "metamodes" "TV: nvidia-auto-select +0+0"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection