Go Back   nV News Forums > Linux Support Forums > NVIDIA FreeBSD
Reload this Page VT-switching works only if no TV is attached, zapping works always
Home Feed Me Chat Register FAQ Calendar Mark Forums Read

Newegg Daily Deals

Reply
 
Thread Tools
Old 07-13-09, 02:39 PM   #1
jsbid
Registered User
 
Join Date: May 2006
Posts: 8
Default VT-switching works only if no TV is attached, zapping works always
FreeBSD 7.2-STABLE
xorg-server-1.6.1
NO hald or dbus crap
nvidia0: <GeForce 7300 LE> on vgapci0
Nvidia driver: 185.18.14

A DFP is connected to the DVI port of the card.
A TV is connected to the Cinch-Port of the card.

Zapping (Ctrl-Alt-Backspace) works always, the server teminates and drops
to the console.
VT-switching (Ctrl-Alt-Fn) switches to the VT but the cursor is in the upper left
corner and keypresses are ignored. However, by pressing Alt-F8 I can return to
the X session and everything is OK there.

When I start the X-server without the TV being connected, VT-switching works.

I have attached the Xorg.log files for both cases, their diff and the xorg.conf.
I have also played around by loading the int10 module and played with its
options. Nothing changes.

Any idea whats going on here?

Thanks!

diff between both logs:
Code:
--- xorg.log_NOTV       2009-07-13 20:36:50.000000000 +0200
+++ xorg.log_TV 2009-07-13 20:34:29.000000000 +0200
@@ -11,7 +11,7 @@
 Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
-(==) Log file: "/var/log/Xorg.0.log", Time: Mon Jul 13 20:34:49 2009
+(==) Log file: "/var/log/Xorg.0.log", Time: Mon Jul 13 19:33:58 2009
 (==) Using config file: "/usr/local/lib/X11/xorg.conf"
 (++) ServerLayout "voyager"
 (**) |-->Screen "NV_PCIe_H0-DFP1280" (0)
@@ -162,9 +162,10 @@
 (II) NVIDIA(0): Detected PCI Express Link width: 8X
 (--) NVIDIA(0): Interlaced video modes are supported on this GPU
 (--) NVIDIA(0): Connected display device(s) on GeForce 7300 LE at PCI:7:0:0:
+(--) NVIDIA(0):     NVIDIA TV Encoder (TV-0)
 (--) NVIDIA(0):     FUS P19-2 (DFP-0)
-(--) NVIDIA(0): FUS P19-2 (DFP-0): 165.0 MHz maximum pixel clock
-(--) NVIDIA(0): FUS P19-2 (DFP-0): Internal Single Link TMDS
+(--) NVIDIA(0): NVIDIA TV Encoder (TV-0): 400.0 MHz maximum pixel clock
+(--) NVIDIA(0): TV encoder: NVIDIA
 (II) NVIDIA(0): Assigned Display Device: DFP-0
 (II) NVIDIA(0): Validated modes:
 (II) NVIDIA(0):     "1280x1024"
@@ -194,17 +195,18 @@
 (II) NVIDIA(1): Detected PCI Express Link width: 8X
 (--) NVIDIA(1): Interlaced video modes are supported on this GPU
 (--) NVIDIA(1): Connected display device(s) on GeForce 7300 LE at PCI:7:0:0:
+(--) NVIDIA(1):     NVIDIA TV Encoder (TV-0)
 (--) NVIDIA(1):     FUS P19-2 (DFP-0)
-(--) NVIDIA(1): FUS P19-2 (DFP-0): 165.0 MHz maximum pixel clock
-(--) NVIDIA(1): FUS P19-2 (DFP-0): Internal Single Link TMDS
-(WW) NVIDIA(1): Unable to find any of the requested display device "TV-0" in
-(WW) NVIDIA(1):     the list of available display devices "".
-(EE) NVIDIA(1): Unable to find available Display Devices for screen 1.
-(II) UnloadModule: "nvidia"
-(II) UnloadModule: "wfb"
-(II) UnloadModule: "fb"
+(--) NVIDIA(1): NVIDIA TV Encoder (TV-0): 400.0 MHz maximum pixel clock
+(--) NVIDIA(1): TV encoder: NVIDIA
+(II) NVIDIA(1): Assigned Display Device: TV-0
+(II) NVIDIA(1): Validated modes:
+(II) NVIDIA(1):     "720x576"
+(II) NVIDIA(1): Virtual screen size determined to be 720 x 576
+(==) NVIDIA(1): DPI set to (75, 75); computed from built-in default
+(==) NVIDIA(1): Enabling 32-bit ARGB GLX visuals.
 (--) Depth 24 pixmap format is 32 bpp
-(II) do I need RAC?  No, I don't.
+(II) do I need RAC?  Yes, I do.
 (II) resource ranges after preInit:
        [0] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[b]
        [1] -1  0       0x000c0000 - 0x000effff (0x30000) MX[b]
@@ -224,6 +226,17 @@
 (II) Loading extension NV-CONTROL
 (II) Loading extension XINERAMA
 (==) RandR enabled
+(II) NVIDIA(1): Initialized GPU GART.
+(II) NVIDIA(1): Setting mode "720x576"
+(II) NVIDIA(1): NVIDIA 3D Acceleration Architecture Initialized
+(==) NVIDIA(1): Disabling shared memory pixmaps
+(II) NVIDIA(1): Using the NVIDIA 2D acceleration architecture
+(==) NVIDIA(1): Backing store disabled
+(==) NVIDIA(1): Silken mouse enabled
+(II) NVIDIA(1): DPMS enabled
+(==) RandR enabled
+(II) Entity 0 shares no resources
+(II) Entity 1 shares no resources
 (II) Initializing built-in extension Generic Event Extension
 (II) Initializing built-in extension SHAPE
 (II) Initializing built-in extension MIT-SHM
@@ -274,3 +287,4 @@
 (**) Option "CustomKeycodes" "off"
 (**) Keyboard: CustomKeycodes disabled
 (II) XINPUT: Adding extended input device "Keyboard" (type: KEYBOARD)
Attached Files
File Type: log xorg_TV.log (12.3 KB, 140 views)
File Type: log xorg_NOTV.log (11.8 KB, 136 views)
File Type: txt xorg_log_diff.txt (3.5 KB, 178 views)
File Type: txt xorg_conf.txt (10.5 KB, 143 views)
jsbid is offline   Reply With Quote
Old 07-13-09, 02:40 PM   #2
jsbid
Registered User
 
Join Date: May 2006
Posts: 8
Default Re: VT-switching works only if no TV is attached, zapping works always
Xorg.log WITH TV
Code:
X.Org X Server 1.6.1
Release Date: 2009-4-14
X Protocol Version 11, Revision 0
Build Operating System: FreeBSD 7.2-STABLE i386
Current Operating System: FreeBSD voyager 7.2-STABLE FreeBSD 7.2-STABLE #2: Sun Jul 12 14:28:15 CEST
 2009     root@voyager:/src/obj-7/src/src-7/sys/voyager i386
Build Date: 06 July 2009  09:24:59PM

        Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Jul 13 19:33:58 2009
(==) Using config file: "/usr/local/lib/X11/xorg.conf"
(++) ServerLayout "voyager"
(**) |-->Screen "NV_PCIe_H0-DFP1280" (0)
(**) |   |-->Monitor "DFP1280"
(**) |   |-->Device "NV_PCIe_H0"
(**) |-->Screen "NV_PCIe_H1-TV" (1)
(**) |   |-->Monitor "TV"
(**) |   |-->Device "NV_PCIe_H1"
(**) |-->Input Device "Mouse"
(**) |-->Input Device "Keyboard"
(**) Option "DontZap" "False"
(==) Not automatically adding devices
(==) Not automatically enabling devices
(**) FontPath set to:
        /usr/local/lib/X11/fonts/misc/,
        /usr/local/lib/X11/fonts/75dpi/,
        /usr/local/lib/X11/fonts/TTF/,
        /usr/local/lib/X11/fonts/misc,
        built-ins
(**) ModulePath set to "/usr/local/lib/xorg/modules"
(II) Loader magic: 0x6a0
(II) Module ABI versions:
        X.Org ANSI C Emulation: 0.4
        X.Org Video Driver: 5.0
        X.Org XInput driver : 4.0
        X.Org Server Extension : 2.0
(II) Loader running on freebsd
(--) Using syscons driver with X support (version 2.0)
(--) using VT number 8

(--) PCI:*(0@7:0:0) nVidia Corporation G72 [GeForce 7300 LE] rev 161, Mem @ 0xfd000000/16777216, 0xd
0000000/268435456, 0xfc000000/16777216, BIOS @ 0x????????/65536
(--) PCI: (0@1:2:0) Brooktree Corporation Bt878 Video Capture rev 2, Mem @ 0xcfefe000/4096
(II) System resource ranges:
        [0] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[b]
        [1] -1  0       0x000c0000 - 0x000effff (0x30000) MX[b]
        [2] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX[b]
        [3] -1  0       0x0000ffff - 0x0000ffff (0x1) IX[b]
        [4] -1  0       0x00000000 - 0x000000ff (0x100) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded by default.
(II) "glx" will be loaded by default.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) LoadModule: "extmod"
(II) Loading /usr/local/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
        compiled for 1.6.1, module version = 1.0.0
        Module class: X.Org Server Extension
        ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/local/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
        compiled for 1.6.1, module version = 1.0.0
        Module class: X.Org Server Extension
        ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/local/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
        compiled for 4.0.2, module version = 1.0.0
        Module class: X.Org Server Extension
(II) NVIDIA GLX Module  185.18.14  Wed May 27 01:13:19 PDT 2009
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/local/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
        compiled for 1.6.1, module version = 1.13.0
        Module class: X.Org Server Extension
        ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/local/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
        compiled for 1.6.1, module version = 1.0.0
        ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/local/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
        compiled for 1.6.1, module version = 1.0.0
        ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nvidia"
(II) Loading /usr/local/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
        compiled for 4.0.2, module version = 1.0.0
        Module class: X.Org Video Driver
(II) LoadModule: "mouse"
(II) Loading /usr/local/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
        compiled for 1.6.1, module version = 1.4.0
        Module class: X.Org XInput Driver
        ABI class: X.Org XInput driver, version 4.0
(II) LoadModule: "kbd"
(II) Loading /usr/local/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
        compiled for 1.6.1, module version = 1.3.2
        Module class: X.Org XInput Driver
        ABI class: X.Org XInput driver, version 4.0
(II) NVIDIA dlloader X Driver  185.18.14  Wed May 27 00:53:37 PDT 2009
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 07@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/local/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
        compiled for 1.6.1, module version = 1.0.0
        ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/local/lib/xorg/modules//libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
        compiled for 1.6.1, module version = 1.0.0
        ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) resource ranges after probing:
        [0] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[b]
        [1] -1  0       0x000c0000 - 0x000effff (0x30000) MX[b]
        [2] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX[b]
        [3] -1  0       0x0000ffff - 0x0000ffff (0x1) IX[b]
        [4] -1  0       0x00000000 - 0x000000ff (0x100) IX[b]
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "NoLogo" "True"
(**) NVIDIA(0): Option "UseEdidFreqs" "False"
(**) NVIDIA(0): Option "Coolbits" "1"
(**) NVIDIA(0): Option "UseDisplayDevice" "DFP-0"
(**) NVIDIA(0): Enabling RENDER acceleration
(**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID has been
(**) NVIDIA(0):     disabled on all display devices.
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0):     enabled.
(II) NVIDIA(0): NVIDIA GPU GeForce 7300 LE (G72) at PCI:7:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 524288 kBytes
(--) NVIDIA(0): VideoBIOS: 05.72.22.75.00
(II) NVIDIA(0): Detected PCI Express Link width: 8X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce 7300 LE at PCI:7:0:0:
(--) NVIDIA(0):     NVIDIA TV Encoder (TV-0)
(--) NVIDIA(0):     FUS P19-2 (DFP-0)
(--) NVIDIA(0): NVIDIA TV Encoder (TV-0): 400.0 MHz maximum pixel clock
(--) NVIDIA(0): TV encoder: NVIDIA
(II) NVIDIA(0): Assigned Display Device: DFP-0
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0):     "1280x1024"
(II) NVIDIA(0):     "1024x768"
(II) NVIDIA(0):     "800x600"
(II) NVIDIA(0):     "640x480"
(II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024
(--) NVIDIA(0): DPI set to (85, 86); computed from "UseEdidDpi" X config
(--) NVIDIA(0):     option
(==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(**) NVIDIA(1): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(1): RGB weight 888
(==) NVIDIA(1): Default visual is TrueColor
(==) NVIDIA(1): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(1): Option "NoLogo" "True"
(**) NVIDIA(1): Option "TVStandard" "PAL-B"
(**) NVIDIA(1): Option "TVOutFormat" "COMPOSITE"
(**) NVIDIA(1): Option "TVOverScan" "0.9"
(**) NVIDIA(1): Option "Coolbits" "1"
(**) NVIDIA(1): Option "UseDisplayDevice" "TV-0"
(**) NVIDIA(1): Enabling RENDER acceleration
(**) NVIDIA(1): Forcing COMPOSITE video output
(**) NVIDIA(1): TV Standard string: "PAL-B"
(II) NVIDIA(1): NVIDIA GPU GeForce 7300 LE (G72) at PCI:7:0:0 (GPU-0)
(--) NVIDIA(1): Memory: 524288 kBytes
(--) NVIDIA(1): VideoBIOS: 05.72.22.75.00
(II) NVIDIA(1): Detected PCI Express Link width: 8X
(--) NVIDIA(1): Interlaced video modes are supported on this GPU
(--) NVIDIA(1): Connected display device(s) on GeForce 7300 LE at PCI:7:0:0:
(--) NVIDIA(1):     NVIDIA TV Encoder (TV-0)
(--) NVIDIA(1):     FUS P19-2 (DFP-0)
(--) NVIDIA(1): NVIDIA TV Encoder (TV-0): 400.0 MHz maximum pixel clock
(--) NVIDIA(1): TV encoder: NVIDIA
(II) NVIDIA(1): Assigned Display Device: TV-0
(II) NVIDIA(1): Validated modes:
(II) NVIDIA(1):     "720x576"
(II) NVIDIA(1): Virtual screen size determined to be 720 x 576
(==) NVIDIA(1): DPI set to (75, 75); computed from built-in default
(==) NVIDIA(1): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  Yes, I do.
(II) resource ranges after preInit:
        [0] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[b]
        [1] -1  0       0x000c0000 - 0x000effff (0x30000) MX[b]
        [2] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX[b]
        [3] -1  0       0x0000ffff - 0x0000ffff (0x1) IX[b]
        [4] -1  0       0x00000000 - 0x000000ff (0x100) IX[b]
(II) NVIDIA(0): Initialized GPU GART.
(II) NVIDIA(0): Setting mode "1280x1024"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(==) NVIDIA(0): Disabling shared memory pixmaps
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(**) Option "dpms"
(**) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(II) Loading extension XINERAMA
(==) RandR enabled
(II) NVIDIA(1): Initialized GPU GART.
(II) NVIDIA(1): Setting mode "720x576"
(II) NVIDIA(1): NVIDIA 3D Acceleration Architecture Initialized
(==) NVIDIA(1): Disabling shared memory pixmaps
(II) NVIDIA(1): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(1): Backing store disabled
(==) NVIDIA(1): Silken mouse enabled
(II) NVIDIA(1): DPMS enabled
(==) RandR enabled
(II) Entity 0 shares no resources
(II) Entity 1 shares no resources
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing extension GLX
(**) Option "Protocol" "auto"
(**) Mouse: Device: "/dev/sysmouse"
(**) Mouse: Protocol: "auto"
(**) Option "CorePointer"
(**) Mouse: always reports core events
(**) Option "Device" "/dev/sysmouse"
(==) Mouse: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5 6 7"
(**) Mouse: ZAxisMapping: buttons 4, 5, 6 and 7
(**) Mouse: Buttons: 11
(**) Mouse: Sensitivity: 1
(II) XINPUT: Adding extended input device "Mouse" (type: MOUSE)
(**) Mouse: (accel) keeping acceleration scheme 1
(**) Mouse: (accel) filter chain progression: 2.00
(**) Mouse: (accel) filter stage 0: 20.00 ms
(**) Mouse: (accel) set acceleration profile 0
(II) Mouse: SetupAuto: hw.iftype is 4, hw.model is 0
(II) Mouse: SetupAuto: protocol is SysMouse
(**) Option "CoreKeyboard"
(**) Keyboard: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard: Protocol: standard
(**) Option "AutoRepeat" "250 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard: XkbModel: "pc105"
(**) Option "XkbLayout" "us,ru(phonetic),us(intl)"
(**) Keyboard: XkbLayout: "us,ru(phonetic),us(intl)"
(**) Option "XkbOptions" "terminate:ctrl_alt_bksp,grp:alt_shift_toggle"
(**) Keyboard: XkbOptions: "terminate:ctrl_alt_bksp,grp:alt_shift_toggle"
(**) Option "CustomKeycodes" "off"
(**) Keyboard: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard" (type: KEYBOARD)
(II) 3rd Button detected: disabling emulate3Button
jsbid is offline   Reply With Quote
Old 07-13-09, 02:42 PM   #3
jsbid
Registered User
 
Join Date: May 2006
Posts: 8
Default Re: VT-switching works only if no TV is attached, zapping works always
Xorg.log WITHOUT TV

Code:
X.Org X Server 1.6.1
Release Date: 2009-4-14
X Protocol Version 11, Revision 0
Build Operating System: FreeBSD 7.2-STABLE i386
Current Operating System: FreeBSD voyager 7.2-STABLE FreeBSD 7.2-STABLE #2: Sun Jul 12 14:28:15 CEST
 2009     root@voyager:/src/obj-7/src/src-7/sys/voyager i386
Build Date: 06 July 2009  09:24:59PM

        Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Jul 13 20:34:49 2009
(==) Using config file: "/usr/local/lib/X11/xorg.conf"
(++) ServerLayout "voyager"
(**) |-->Screen "NV_PCIe_H0-DFP1280" (0)
(**) |   |-->Monitor "DFP1280"
(**) |   |-->Device "NV_PCIe_H0"
(**) |-->Screen "NV_PCIe_H1-TV" (1)
(**) |   |-->Monitor "TV"
(**) |   |-->Device "NV_PCIe_H1"
(**) |-->Input Device "Mouse"
(**) |-->Input Device "Keyboard"
(**) Option "DontZap" "False"
(==) Not automatically adding devices
(==) Not automatically enabling devices
(**) FontPath set to:
        /usr/local/lib/X11/fonts/misc/,
        /usr/local/lib/X11/fonts/75dpi/,
        /usr/local/lib/X11/fonts/TTF/,
        /usr/local/lib/X11/fonts/misc,
        built-ins
(**) ModulePath set to "/usr/local/lib/xorg/modules"
(II) Loader magic: 0x6a0
(II) Module ABI versions:
        X.Org ANSI C Emulation: 0.4
        X.Org Video Driver: 5.0
        X.Org XInput driver : 4.0
        X.Org Server Extension : 2.0
(II) Loader running on freebsd
(--) Using syscons driver with X support (version 2.0)
(--) using VT number 8

(--) PCI:*(0@7:0:0) nVidia Corporation G72 [GeForce 7300 LE] rev 161, Mem @ 0xfd000000/16777216, 0xd
0000000/268435456, 0xfc000000/16777216, BIOS @ 0x????????/65536
(--) PCI: (0@1:2:0) Brooktree Corporation Bt878 Video Capture rev 2, Mem @ 0xcfefe000/4096
(II) System resource ranges:
        [0] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[b]
        [1] -1  0       0x000c0000 - 0x000effff (0x30000) MX[b]
        [2] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX[b]
        [3] -1  0       0x0000ffff - 0x0000ffff (0x1) IX[b]
        [4] -1  0       0x00000000 - 0x000000ff (0x100) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded by default.
(II) "glx" will be loaded by default.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) LoadModule: "extmod"
(II) Loading /usr/local/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
        compiled for 1.6.1, module version = 1.0.0
        Module class: X.Org Server Extension
        ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/local/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
        compiled for 1.6.1, module version = 1.0.0
        Module class: X.Org Server Extension
        ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/local/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
        compiled for 4.0.2, module version = 1.0.0
        Module class: X.Org Server Extension
(II) NVIDIA GLX Module  185.18.14  Wed May 27 01:13:19 PDT 2009
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/local/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
        compiled for 1.6.1, module version = 1.13.0
        Module class: X.Org Server Extension
        ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/local/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
        compiled for 1.6.1, module version = 1.0.0
        ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/local/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
        compiled for 1.6.1, module version = 1.0.0
        ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nvidia"
(II) Loading /usr/local/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
        compiled for 4.0.2, module version = 1.0.0
        Module class: X.Org Video Driver
(II) LoadModule: "mouse"
(II) Loading /usr/local/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
        compiled for 1.6.1, module version = 1.4.0
        Module class: X.Org XInput Driver
        ABI class: X.Org XInput driver, version 4.0
(II) LoadModule: "kbd"
(II) Loading /usr/local/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
        compiled for 1.6.1, module version = 1.3.2
        Module class: X.Org XInput Driver
        ABI class: X.Org XInput driver, version 4.0
(II) NVIDIA dlloader X Driver  185.18.14  Wed May 27 00:53:37 PDT 2009
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 07@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/local/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
        compiled for 1.6.1, module version = 1.0.0
        ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/local/lib/xorg/modules//libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
        compiled for 1.6.1, module version = 1.0.0
        ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) resource ranges after probing:
        [0] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[b]
        [1] -1  0       0x000c0000 - 0x000effff (0x30000) MX[b]
        [2] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX[b]
        [3] -1  0       0x0000ffff - 0x0000ffff (0x1) IX[b]
        [4] -1  0       0x00000000 - 0x000000ff (0x100) IX[b]
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "NoLogo" "True"
(**) NVIDIA(0): Option "UseEdidFreqs" "False"
(**) NVIDIA(0): Option "Coolbits" "1"
(**) NVIDIA(0): Option "UseDisplayDevice" "DFP-0"
(**) NVIDIA(0): Enabling RENDER acceleration
(**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID has been
(**) NVIDIA(0):     disabled on all display devices.
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0):     enabled.
(II) NVIDIA(0): NVIDIA GPU GeForce 7300 LE (G72) at PCI:7:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 524288 kBytes
(--) NVIDIA(0): VideoBIOS: 05.72.22.75.00
(II) NVIDIA(0): Detected PCI Express Link width: 8X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce 7300 LE at PCI:7:0:0:
(--) NVIDIA(0):     FUS P19-2 (DFP-0)
(--) NVIDIA(0): FUS P19-2 (DFP-0): 165.0 MHz maximum pixel clock
(--) NVIDIA(0): FUS P19-2 (DFP-0): Internal Single Link TMDS
(II) NVIDIA(0): Assigned Display Device: DFP-0
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0):     "1280x1024"
(II) NVIDIA(0):     "1024x768"
(II) NVIDIA(0):     "800x600"
(II) NVIDIA(0):     "640x480"
(II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024
(--) NVIDIA(0): DPI set to (85, 86); computed from "UseEdidDpi" X config
(--) NVIDIA(0):     option
(==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(**) NVIDIA(1): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(1): RGB weight 888
(==) NVIDIA(1): Default visual is TrueColor
(==) NVIDIA(1): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(1): Option "NoLogo" "True"
(**) NVIDIA(1): Option "TVStandard" "PAL-B"
(**) NVIDIA(1): Option "TVOutFormat" "COMPOSITE"
(**) NVIDIA(1): Option "TVOverScan" "0.9"
(**) NVIDIA(1): Option "Coolbits" "1"
(**) NVIDIA(1): Option "UseDisplayDevice" "TV-0"
(**) NVIDIA(1): Enabling RENDER acceleration
(**) NVIDIA(1): Forcing COMPOSITE video output
(**) NVIDIA(1): TV Standard string: "PAL-B"
(II) NVIDIA(1): NVIDIA GPU GeForce 7300 LE (G72) at PCI:7:0:0 (GPU-0)
(--) NVIDIA(1): Memory: 524288 kBytes
(--) NVIDIA(1): VideoBIOS: 05.72.22.75.00
(II) NVIDIA(1): Detected PCI Express Link width: 8X
(--) NVIDIA(1): Interlaced video modes are supported on this GPU
(--) NVIDIA(1): Connected display device(s) on GeForce 7300 LE at PCI:7:0:0:
(--) NVIDIA(1):     FUS P19-2 (DFP-0)
(--) NVIDIA(1): FUS P19-2 (DFP-0): 165.0 MHz maximum pixel clock
(--) NVIDIA(1): FUS P19-2 (DFP-0): Internal Single Link TMDS
(WW) NVIDIA(1): Unable to find any of the requested display device "TV-0" in
(WW) NVIDIA(1):     the list of available display devices "".
(EE) NVIDIA(1): Unable to find available Display Devices for screen 1.
(II) UnloadModule: "nvidia"
(II) UnloadModule: "wfb"
(II) UnloadModule: "fb"
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
        [0] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[b]
        [1] -1  0       0x000c0000 - 0x000effff (0x30000) MX[b]
        [2] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX[b]
        [3] -1  0       0x0000ffff - 0x0000ffff (0x1) IX[b]
        [4] -1  0       0x00000000 - 0x000000ff (0x100) IX[b]
(II) NVIDIA(0): Initialized GPU GART.
(II) NVIDIA(0): Setting mode "1280x1024"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(==) NVIDIA(0): Disabling shared memory pixmaps
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(**) Option "dpms"
(**) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(II) Loading extension XINERAMA
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing extension GLX
(**) Option "Protocol" "auto"
(**) Mouse: Device: "/dev/sysmouse"
(**) Mouse: Protocol: "auto"
(**) Option "CorePointer"
(**) Mouse: always reports core events
(**) Option "Device" "/dev/sysmouse"
(==) Mouse: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5 6 7"
(**) Mouse: ZAxisMapping: buttons 4, 5, 6 and 7
(**) Mouse: Buttons: 11
(**) Mouse: Sensitivity: 1
(II) XINPUT: Adding extended input device "Mouse" (type: MOUSE)
(**) Mouse: (accel) keeping acceleration scheme 1
(**) Mouse: (accel) filter chain progression: 2.00
(**) Mouse: (accel) filter stage 0: 20.00 ms
(**) Mouse: (accel) set acceleration profile 0
(II) Mouse: SetupAuto: hw.iftype is 4, hw.model is 0
(II) Mouse: SetupAuto: protocol is SysMouse
(**) Option "CoreKeyboard"
(**) Keyboard: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard: Protocol: standard
(**) Option "AutoRepeat" "250 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard: XkbModel: "pc105"
(**) Option "XkbLayout" "us,ru(phonetic),us(intl)"
(**) Keyboard: XkbLayout: "us,ru(phonetic),us(intl)"
(**) Option "XkbOptions" "terminate:ctrl_alt_bksp,grp:alt_shift_toggle"
(**) Keyboard: XkbOptions: "terminate:ctrl_alt_bksp,grp:alt_shift_toggle"
(**) Option "CustomKeycodes" "off"
(**) Keyboard: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard" (type: KEYBOARD)
jsbid is offline   Reply With Quote
Old 07-17-09, 05:51 PM   #4
noheip
Registered User
 
Join Date: Jul 2008
Posts: 11
Default Re: VT-switching works only if no TV is attached, zapping works always
I have no solution, sorry, I just wanted to confirm the problem.
Not exactly with the TV output, but in general I can't switch to the console for some months (http://www.nvnews.net/vbulletin/showthread.php?t=128200).
I have two cards, one of them with DVI and VGA connected (GS7300) and the "main" card (7300GT) has only DVI connected.
If I terminate X I don't see the console, just one blinking cursor upper left.
But typing works!!! I can blindly log in, execute arbitrary commands etc...

This is bothering me long enough, so please tell us the switch to enable console again
Just kidding, but I wonder if nvidia can reproduce this.

Thanks,

-Harry
noheip is offline   Reply With Quote
Old 07-19-09, 01:54 PM   #5
jsbid
Registered User
 
Join Date: May 2006
Posts: 8
Default Re: VT-switching works only if no TV is attached, zapping works always
Quote:
If I terminate X I don't see the console, just one blinking cursor upper left.
That's different here: I can exit X and the console and all VTs are back.

Quote:
Originally Posted by noheip View Post
But typing works!!! I can blindly log in, execute arbitrary commands etc...
Oops, never tried this, but you are right: Typing blindly works!
jsbid is offline   Reply With Quote
Old 07-22-09, 11:27 PM   #6
IncubuS
Registered User
 
Join Date: Jun 2008
Location: Russia, Blagoveshchensk
Posts: 10
Default Re: VT-switching works only if no TV is attached, zapping works always
Hello!

I have similar problem with VT-switching and TV attached.

7.2-STABLE
6600GT AGP
nvidia-driver-180.60
xorg-server-1.6.1

WBR
Attached Files
File Type: gz nvidia-bug-report.log.gz (15.0 KB, 151 views)
IncubuS is offline   Reply With Quote
Old 07-23-09, 01:21 PM   #7
jsbid
Registered User
 
Join Date: May 2006
Posts: 8
Default Re: VT-switching works only if no TV is attached, zapping works always
Forgot to attach my nvidia-bug-report.log.gz, so here we go...
Attached Files
File Type: gz nvidia-bug-report.log.gz (18.2 KB, 128 views)
jsbid is offline   Reply With Quote
Old 08-23-09, 06:10 AM   #8
noheip
Registered User
 
Join Date: Jul 2008
Posts: 11
Default Re: VT-switching works only if no TV is attached, zapping works always
While trying a different second card I found out that the problem exists only with two nvidia cards.
I did some more testing and also found out that even with 2 cards installed, but no active screens on second card, VT-switching and restarting X works fine.
As soon as I acivate one screen on the second card, VT-switching doesn't work anymore and restarting X takes 20 seconds extra delay with garbagded display output (almost every time the same, regular pattern). The same delay occurs when terminating X, so shutting down becomes extra annoying!
I hope somebody is interested in fixing this problem and I could help a bit.

Thanks,

-noheip
noheip is offline   Reply With Quote

Old 08-23-09, 01:57 PM   #9
jsbid
Registered User
 
Join Date: May 2006
Posts: 8
Default Re: VT-switching works only if no TV is attached, zapping works always
Quote:
Originally Posted by noheip View Post
While trying a different second card I found out that the problem exists only with two nvidia cards.
I have the problem with a single card. Never had more than one card
in the machine...
jsbid is offline   Reply With Quote
Old 09-24-09, 01:48 PM   #10
jsbid
Registered User
 
Join Date: May 2006
Posts: 8
Default Re: VT-switching works only if no TV is attached, zapping works always
What's the state of this bug? Is it being worked on? Has it been resolved?
Has it been recognized as a bug (or a feature)? Can we provide more infos?
What else is missing? It would be nice to hear some official statement ;-)

Thanks!
jsbid is offline   Reply With Quote
Old 02-17-10, 01:42 PM   #11
jsbid
Registered User
 
Join Date: May 2006
Posts: 8
Default Re: VT-switching works only if no TV is attached, zapping works always
Quote:
Originally Posted by jsbid View Post
What's the state of this bug? Is it being worked on? Has it been resolved?
Has it been recognized as a bug (or a feature)? Can we provide more infos?
What else is missing? It would be nice to hear some official statement ;-)

Thanks!
Push. Maybe we get at least an answer eventually...
jsbid is offline   Reply With Quote
Reply


« Previous Thread | Next Thread »
Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 11:28 AM.

nV News - Archive - Top

Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2013, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2013, nV News.