|12-15-10, 09:40 PM||#1|
Join Date: Jul 2007
Raid question on expanding array size
I have an oppty to add another drive array and would like to know if I can do an expansion with out killing the original drive array's data.
I have 2 drive arrays, 7x 180 gb in a hardware raid 5 configuration.
Using mdadm, I've created a raid 0 drive. I then used gparted to format the array to a JFS drive
This has been working well for the last few weeks.
I'd like to know if I can safely expand the array by adding a new drive of same size (7x in a raid 5 config)
I'm running Fedora 11 x386. Each raid5 drive is 1083 gb
under mdadm the single drive is 2178gb. Will a 32 bit Linux be able to handle a 3267 gb drive / partition etc or do I need a 64 bit version to go forward?
If so how do I (safely) expand the original raid 0 array?
here is the command I used to create the original array:
mdadm --create /dev/md0 --chunk=64 --level=0 --size=max --raid-devices=2 /dev/cciss/c0d0 /dev/cciss/c0d1
And the entry from fstab to auto mount it
# compaq Raid 5+0
/dev/md0p1 /media/raid50 jfs defaults 0 2
If necessary, I could create a backup ( and probably should anyway) but it would take many days to do the backup.
Do I want to look at a 64 bit version of Fedora for the next upgrade? The latest release of Fedora has been out a while and appears to be quite stable...
|12-16-10, 08:38 AM||#2|
Join Date: Jul 2005
Re: Raid question on expanding array size
This question ist very offtopic.
You do not need a 64 bit linux to access disk drives beyond 2 TiByte. Maybe you are confusing Tera (~ 2^40) with Giga (~ 2^30)? Anyway, disk accesses have been 64 bit addressable for ages in linux on 32 bit architecures.
There is no way I am aware of to exent a raid 0, besides backp and recreate. I am pretty sure it can't be done because of the way the data is striped accross the two drives.