6970 Trifire benchmarks. - Page 5

**Roadhog** · 12-17-10, 10:10 PM

Quote:

Originally Posted by bob saget

so there are no problems driver or compatibility wise...?

none so far. I've been playing Mass Effect 1. Never played 1 or 2 lol.

Muppet · 12-17-10, 11:43 PM

Quote:

Originally Posted by Roadhog

Should be much higher. Since all 3 cards only hit about a 66% utilization

That's good then, that means plenty left in the tank for future driver updates.

onmikesline · 12-18-10, 08:39 AM

thats if ati gets better drivers, but they really dont get anything when it comes to drivers so im not holding my breath

**Roadhog** · 12-20-10, 02:53 AM

Well. Couldn't get the stalker benchmark to run with any AA. Just kept saying cards don't meet the minimum specs. But it would run without AA. So here is what I got.

2560x1440, enhanced full dynamic lighting dx11, hbao to high and tessellation enabled.

-20% Power

When AA failes, MLAA comes to save the day.

**Roadhog** · 12-20-10, 01:20 PM

Seems AA is free on these cards lol..

2560x1440 NO AA

2560x1440 16xQ AA

Only lost 3FPS

**Maverick123w** · 12-20-10, 01:34 PM

I'd like to see the results with only 2 cards in there. Bet it's not far off.

12-20-10, 01:36 PM

can you bench peggle nights WITH vsync on!

**Roadhog** · 12-20-10, 01:46 PM

Quote:

Originally Posted by Maverick123w

I'd like to see the results with only 2 cards in there. Bet it's not far off.

It actually is far off...

Lets say one card gets 23fps, and with 100% scaling two should get 46fps. With two I got 45fps, and 3 gets 60fps. So, nearly 100% scaling with 3 cards. I'll try 1 card now too.

**Roadhog** · 12-20-10, 01:57 PM

1 card

**Roadhog** · 12-20-10, 02:07 PM

1 card = 23.115 fps

2 cards = 45.41 fps
100% scaling would be 46.23 fps. 0.82 fps off of 100%

3 cards = 60.41 fps
100% scaling would be 69.35 fps 8.94 fps off of 100%

So, 2 cards = 100% scaling, and 3 = 61% if my maths are correct. I R BAD AT MATHS... 161%?

Revs · 12-20-10, 02:15 PM

That's pretty darn good. Grats on the upgrade

Bman212121 · 12-21-10, 06:47 PM

Quote:

Originally Posted by Roadhog

1 card = 23.115 fps

2 cards = 45.41 fps
100% scaling would be 46.23 fps. 0.82 fps off of 100%

3 cards = 60.41 fps
100% scaling would be 69.35 fps 8.94 fps off of 100%

So, 2 cards = 100% scaling, and 3 = 61% if my maths are correct. I R BAD AT MATHS... 161%?

Overall it would be
60.41 / 69.35 (aka 100%) = 87% That would be total from 1 to 3 cards.

I'd say it would be
60.41 - 45.41 = 15 / 23.115 or about 65% scaling from two cards to 3 cards. Cause technically that 3rd card did give you the other .82fps the two cards didn't

Bet you're cpu limited anyway, and it would scale higher yet

12-18-10, 08:39 AM	#51
onmikesline Registered User Join Date: Jan 2010 Location: south florida Posts: 887	Re: 6970 Trifire benchmarks. thats if ati gets better drivers, but they really dont get anything when it comes to drivers so im not holding my breath

12-20-10, 02:53 AM	#52
Roadhog Resident Alien Join Date: Jan 2005 Posts: 6,776	Re: 6970 Trifire benchmarks. Well. Couldn't get the stalker benchmark to run with any AA. Just kept saying cards don't meet the minimum specs. But it would run without AA. So here is what I got. 2560x1440, enhanced full dynamic lighting dx11, hbao to high and tessellation enabled. -20% Power When AA failes, MLAA comes to save the day. Last edited by Roadhog; 12-22-10 at 09:55 PM.

12-20-10, 01:20 PM	#53
Roadhog Resident Alien Join Date: Jan 2005 Posts: 6,776	Re: 6970 Trifire benchmarks. Seems AA is free on these cards lol.. 2560x1440 NO AA 2560x1440 16xQ AA Only lost 3FPS

12-20-10, 01:34 PM	#54
Maverick123w Join Date: Nov 2003 Location: Cincinnati, OH Posts: 1,841	Re: 6970 Trifire benchmarks. I'd like to see the results with only 2 cards in there. Bet it's not far off.

12-20-10, 01:36 PM	#55
Roliath Guest Posts: n/a	Re: 6970 Trifire benchmarks. can you bench peggle nights WITH vsync on!

12-20-10, 01:57 PM	#57
Roadhog Resident Alien Join Date: Jan 2005 Posts: 6,776	Re: 6970 Trifire benchmarks. 1 card

12-20-10, 02:07 PM	#58
Roadhog Resident Alien Join Date: Jan 2005 Posts: 6,776	Re: 6970 Trifire benchmarks. 1 card = 23.115 fps 2 cards = 45.41 fps 100% scaling would be 46.23 fps. 0.82 fps off of 100% 3 cards = 60.41 fps 100% scaling would be 69.35 fps 8.94 fps off of 100% So, 2 cards = 100% scaling, and 3 = 61% if my maths are correct. I R BAD AT MATHS... 161%?

12-20-10, 02:15 PM	#59
Revs Registered User Join Date: May 2007 Location: UK Posts: 6,362	Re: 6970 Trifire benchmarks. That's pretty darn good. Grats on the upgrade