Go Back   nV News Forums > Linux Support Forums > NVIDIA Linux

Newegg Daily Deals

Reply
 
Thread Tools
Old 12-09-03, 05:49 PM   #1
1eyedhive
Registered User
 
Join Date: Dec 2003
Posts: 1
Default X crash oddities Visiontek Gf4+RedHat9/mandrake

This is very, very off, has me climbing the walls.
X crashes, with an error of 'no usable configurations' (more below)
when using the nvidia 4496 and 4363 drivers under Red Hat 9 (same error using 4496 under MDK 9.1 and 9.2)

System specs:
Asus A7N8X-DX Motherboard
Visiontek GeForce4 Ti4200 128MB AGP
Sony CPD-E200 monitor
From the XF86config file:
Code:
Section "Monitor"
	Identifier   "Monitor0"
	VendorName   "Monitor Vendor"
	ModelName    "Sony CPD-E200/E200E"
	HorizSync    30.0 - 85.0
	VertRefresh  48.0 - 120.0
	Option	    "dpms"
EndSection

Section "Device"
	Identifier  "Videocard0"
	Driver      "nvidia"
	VendorName  "Videocard vendor"
	BoardName   "NVIDIA GeForce 4 (generic)"
	VideoRam    131072
	Option	    "NvAgp" "1"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Videocard0"
	Monitor    "Monitor0"
	DefaultDepth     24
	SubSection "Display"
		Depth     24
		Modes    "1024x768" "800x600" "640x480"
	EndSubSection
Note the refresh rates under the monitor are H: 30-85 V:48-120
Now the Log file from that config:
Code:
(II) Module ddc: vendor="The XFree86 Project"
	compiled for 4.3.0, module version = 1.0.0
	ABI class: XFree86 Video Driver, version 0.6
(WW) NVIDIA(0): The user specified VertRefresh "48.000-120.000" has been
(WW) NVIDIA(0):      adjusted to "" (the intersection with EDID-specified
(WW) NVIDIA(0):      VertRefresh "161.000-255.000"
(EE) NVIDIA(0): no VertRefresh values remaining
(II) NVIDIA(0): Monitor0: Using hsync range of 30.00-85.00 kHz
(WW) NVIDIA(0): Monitor0: using default vrefresh range of 161.00-255.00Hz
(II) NVIDIA(0): Clock range:  12.00 to 350.00 MHz
(II) NVIDIA(0): Not using default mode "640x350" (vrefresh out of range)
--SNIP--
(II) NVIDIA(0): Not using default mode "1024x768" (hsync out of range)
(WW) NVIDIA(0): Mode pool is empty
(EE) NVIDIA(0): No modes remaining for display device CRT-1
(EE) NVIDIA(0):  *** Aborting ***
(II) UnloadModule: "nvidia"
(II) UnloadModule: "ddc"
(II) Unloading /usr/X11R6/lib/modules/libddc.a
(II) UnloadModule: "vgahw"
(II) Unloading /usr/X11R6/lib/modules/libvgahw.a
(EE) Screen(s) found, but none have a usable configuration.

Fatal server error:
no screens found
Note the new values 161-255
it makes X puke, this happens with both drivers in multiple distros, i'm thinking the monitor's the culprit. at theis point.

X runs fine with the 'nv' red hat default drivers in operation, but pukes otherwise, with the 4496 drivers, it kills the framebuffer too, the 43x doesnt do that. HELP!!!
1eyedhive is offline   Reply With Quote
Old 12-10-03, 11:06 PM   #2
LordMorgul
Electrical Engineer
 
LordMorgul's Avatar
 
Join Date: Dec 2002
Location: San Luis Obispo, CA
Posts: 872
Default

When running the 'nv' driver does the log show your defined refresh rates are accepted or are they also changed?

Option "dpms"

should be (according to man XF86Config)
Option "DPMS"
__________________
"..the triumph of evil is for good men to do nothing." (Edmond Burke)
nVIDIA video driver RPMs for Fedora :: see yum repo at livna.org.
LordMorgul is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


Similar Threads
Thread Thread Starter Forum Replies Last Post
FS Visiontek GF4 Ti4600 bkswaney For Sale/Trade 4 08-27-02 09:58 PM

All times are GMT -5. The time now is 12:49 PM.


Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright 1998 - 2014, nV News.