Go Back   nV News Forums > Linux Support Forums > NVIDIA Linux

Newegg Daily Deals

Reply
 
Thread Tools
Old 02-10-12, 06:16 AM   #1
Rodercot
Registered User
 
Join Date: Feb 2010
Location: Ottawa, Canada
Posts: 12
Default 295.09 and 295.17 Causing multiple HDMI/dp hotplug instances in dmesg report

I reported this in the hdmi not working thread but after more testing i really do not think it is the same problem.

I have done a clean install of Mythbuntu 11.10 several times in the past week regarding this issue. I run mythbuntu 11.10 on this test machine, Vanilla included kernel. GT430, Asrock Z68USB3 board (no new bios file available) Myth setup is frontend only. I have Lcdproc, lirc, lm-sensors and xbmc built from git installed currently. I have alsa tested this with 3.3rc1 and rc2 both react the same way.

my /etc/modprobe.d/sound.conf includes

options snd-hda-intel enable_msi=0 probe_mask=0x108

So after installing x-swat and nvidia-current (290.10) everything works as it should I boot up check dmesg there is one instance of a hdmi hotplug. open xbmc and everything works as it should gui sounds, file playback is fine with all codecs. mythfrontend responds as it should live tv and recorded shows are fine.

After purging nvidia-current and blacklisting nouveau and if I install either 295.09 or 295.17, drivers install fine, I reboot and it loads fine with my xorg.conf file. Open xbmc gui sounds are good so it initilaized the sound card fine, as soon as I start to play any file video or audio it looses the sound card and gives me a cannot initialize sound card, this is in the same session of xbmc. If I then exit xbmc and look at dmesg I see as many as 4 hdmi/dp hot plug instances all for the same eld valid and same monitor but I only have one instance of the sound card in alsa as per my sound.conf probe_mask dev 7, 8, 9 are masked and only dev 3 is active.

I included dmesg pastebins in the hdmi not working thread for both nvidia-current and 295 installation so a working and non-working report.

working 290.10 http://pastebin.ca/2113498

non-working 295.xx http://pastebin.ca/2113474

Dave
Rodercot is offline   Reply With Quote
Old 02-15-12, 09:20 AM   #2
sandipt
NVIDIA Corporation
 
sandipt's Avatar
 
Join Date: Dec 2010
Posts: 260
Default Re: 295.09 and 295.17 Causing multiple HDMI/dp hotplug instances in dmesg report

Please provide nvidia bug report by running nvidia-bug-report.sh as root.
sandipt is offline   Reply With Quote
Old 02-15-12, 10:22 AM   #3
sandipt
NVIDIA Corporation
 
sandipt's Avatar
 
Join Date: Dec 2010
Posts: 260
Default Re: 295.09 and 295.17 Causing multiple HDMI/dp hotplug instances in dmesg report

Also try : command `aplay -l` you will see audio devices .

and run any audio file :

aplay -D plughw:1,9 nara_192_32_2.wav

where 1 = card and 9 = device

Also I tried adding custom audio device = plughw:1,9 in XBMC audio output settings.
sandipt is offline   Reply With Quote
Old 02-29-12, 12:55 AM   #4
sandipt
NVIDIA Corporation
 
sandipt's Avatar
 
Join Date: Dec 2010
Posts: 260
Default Re: 295.09 and 295.17 Causing multiple HDMI/dp hotplug instances in dmesg report

Rodercot, Any updates ?
sandipt is offline   Reply With Quote
Old 03-01-12, 02:50 PM   #5
Rodercot
Registered User
 
Join Date: Feb 2010
Location: Ottawa, Canada
Posts: 12
Default Re: 295.09 and 295.17 Causing multiple HDMI/dp hotplug instances in dmesg report

Frustrated! I got rid of the installation and went to pulse-eight openelec and x-swat 295.20 and all seems fine. Sorry I had not checked back in a while.

Dave
Rodercot is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 03:43 AM.


Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright 1998 - 2014, nV News.