|01-16-04, 04:20 AM||#1|
Join Date: Jan 2004
I have a Geforce4 MX440 (AGPx8) in SUSE 9.0
I'm unable to find a correct way to configure the Dual view for two monitors. After choose a lot of changes spending hours the configuration gived on the NVdia intructions doesn't work for me.
I PRAY if somebody knows some way to recognize both monitors please paste here.
Thanks so much,
Also, in SAX2 this card is not present althoug in the README section she appear as a supported card. I have the MX440-SE option. It is right?
|01-17-04, 04:22 AM||#2|
Join Date: Dec 2002
Location: San Luis Obispo, CA
All nvidia cards Geforce 1 and above are supported, with the exception on the very newest models (the 5700 and 5950 seem to be questionable I guess). Yours is supported.
There are numerous ways to connect and configure two monitors. You will need to supply information about your setup, including the monitor models, how you want them connected, etc. You'll also need to post your current config, with your attempts at making it work. And lastly, asking specific questions will get you much better responses, especially using the terminology presented in the readme.
For some more info, you should look into the config for X:
|Thread||Thread Starter||Forum||Replies||Last Post|
|Nvidia Quadro 420 and dual 30" monitors||quickSTi||NVIDIA Linux||2||06-20-12 12:04 PM|
|Problems with configuring monitors and keeping them disabled with 302.17||Erosmith||NVIDIA Linux||2||06-20-12 12:10 AM|
|quadro 1000m with 2 external monitors||stephenh||NVIDIA Linux||1||06-14-12 04:04 PM|
|How's Phillips for Monitors?||Switch||General Hardware||11||10-09-02 07:40 AM|
|Monitors found but no configuration suitable||bluephile||NVIDIA Linux||4||08-31-02 06:53 AM|