|02-15-04, 06:14 PM||#1|
Join Date: Feb 2004
Location: South of France
twinview "clone" + tvout = screen too wide !
First my config :
Vidéo card : Leadtek A250LE MyVIVO GeForce 4 Ti 4200.
Driver version : NVIDIA-Linux-x86-1.0-5336-pkg1
Distribution : Debian unstable.
Xfree version : 4.3.0
Video bios revision : 04.25.00.30.00
Processor : P 4 2.0 Ghz
Motherboard : ASUS P4G8X.
TV : Sony 19/9 100Hz
I just want running twinview in clone mode with a CRT Monitor and a tv (for watching dvd ...)
In my XF86Config-4 file (attached) there is 2 mode 1024x768 and 800x600.
When I start everything it's ok, monitor's screen is in good résolution and tv's screen is black.
But when I switch in 800x600 mode monitor's screen becomes too wide (I can move it with my mouse) and same on tv's screen. It impossible watching movies because only part of picture is display.
I tried other mode like 640x480 and less but it's worse.
I don't know if it's important but when I boot with tv connected half of my monitor's screen is black under non-X mode (console).
I search alone since a couple of days (even on this forum) but I don't find solution so please help me.
I'm realy sorry for my english.
My XF86Config-4 file
|02-16-04, 06:47 AM||#3|
Join Date: Jul 2002
Location: Netherlands, Europe
This is normal behaviour. The virtual resolution on one of the screens is allways equal to the biggest used resolution in twinview.
|Thread||Thread Starter||Forum||Replies||Last Post|
|$1,199.99 - DoubleSight DS-307W Black 30" 7ms HDMI Widescreen Wide Screen LCD Monitor||News||30-Inch||0||06-10-12 02:50 PM|
|XF86Config for a Quadro4 without TwinView?||Twirlip||NVIDIA Linux||1||10-09-02 11:36 AM|