|
|
#1 | |
|
Registered User
Join Date: May 2004
Posts: 7
|
I had a nice running system with a Geforce 2 MX card.
Some days ago this card has died (probably thermal problems) so I replaced it with a brand new XFX PCI card with GeForce FX 5200. I DID'NT CHANGE ANY SOFTWARE. The system comes up and seems to work nice, except that I cannot terminate X11 (via <ctrl><alt><del>) and worse, I cannot switch to a text terminal (via <ctrl> <F2>) If I try one of these the system hangs - it cannot even be pinged from the network, so I have to do a hardware reset. If I use the NV driver from the XFree tarball I don't have any of these problems. start X with startx -- -logverbose 5 Doesn't contain any relevant information - your video card XFX PCI card with GeForce FX 5200 - your driver version NVIDIA-Linux-x86-1.0-5336-pkg1.run - your distribution Linux from Scratch - your video bios revision (look in /proc/driver/nvidia/cards/0 while X is running) Model: GeForce FX 5200 IRQ: 24 Video BIOS: 04.34.20.27.01 Card Type: PCI - your processor dual Pentium III - your motherboard model (especially if you're having lockups) SuperMicro P3TDLE |
|
|
|
|
|
|
#2 | |
|
550Ti
Join Date: Jan 2004
Location: New Zealand
Posts: 854
|
Does your system work in Windows? I ask because a modern FX AGP card may not work in a system as old as a P3. The AGP rate may not be supported.
|
|
|
|
|
|
|
#3 |
|
Registered User
Join Date: May 2004
Posts: 2
|
Hi,
i have the same problem running fedora (kernel 2.6.5-1.327) on a dell inspiron 8200, new bios a11, with Geforce2go. Windows XP was original installed, X works fine with nv and with the nvidia driver, the system hangs. ![]() Last edited by NewVidioCard; 05-08-04 at 11:36 AM. |
|
|
|
|
|
#4 | |
|
Registered User
Join Date: May 2004
Posts: 7
|
Quote:
port. So my XFX is a PCI card. |
|
|
|
|
|
|
#5 |
|
Registered User
Join Date: May 2004
Posts: 2
|
Yes, it works with Windows 2k and Windows XP!
|
|
|
|
|
|
#6 | |
|
Registered User
Join Date: May 2004
Posts: 7
|
SOLVEDA hint given on this forum elsewhere did help me, as well. What DID help me, though, is placing Option "ConnectedMonitor" "CRT" in the Device section. |
|
|
|
|
![]() |
| Thread Tools | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Thoughts from console owners on NVIDIA's GEFORCE GRID | MikeC | Console World | 11 | 05-27-12 08:43 AM |