The EE and 03

[Lars]

Originally Posted by Nebuchadnezzar

Nice comp Lars

Thanks buddy. I kinda' like it

[Road_Star]

nVestor,

Thanks for all the info, I have used most of it already. I do have a question, when I set it to manual I can not make any changes to the [200] fsb field!

All the other fields change to a drop-down list after hitting enter. And I can make changes. I did flash the bios up to the latest version. Could this have gone bad and do you think reflashing it may help?

Thanks again for all your help.

Cheers!

[nVestor]

Originally Posted by Road_Star

nVestor,

Thanks for all the info, I have used most of it already. I do have a question, when I set it to manual I can not make any changes to the [200] fsb field!

All the other fields change to a drop-down list after hitting enter. And I can make changes. I did flash the bios up to the latest version. Could this have gone bad and do you think reflashing it may help?

Thanks again for all your help.

Cheers!

Just use the numpad + and - signs. That is how you add or subtract the FSB in 1Mhz increments.

[Road_Star]

nVestor,

Many many thanks for helping me get this rig up to speed. I bet I spent hours trying to punch numbers into that field.

I 'm just on air so don't laugh to hard: FSB = 4 x 230 = 920 MHz
Memory Buss = 2 x 230 = 460 MHz

3DMark03 = 14,299 Compare

I will test some more later. Wish I had some phase change equipment!
Thanks again to all of you that helped this overclocking noob get off the ground.

[nVestor]

hehe, your welcome

[Blacklash]

Just a general note. If you have a chipset with "gaming acceleration". Disable the last two settings under the gaming category in your BIOS. Certainly, make sure you kill the last one, CPC<, it greatly hinders your OC.