|10-21-04, 02:27 AM||#1|
Join Date: Oct 2004
[SuSe 9.1] install with RAID
I have problems during the installation of Linux SuSe 9.1, during config of my hard drives.
My config :
Athlon 3800 64bit, 2 HD RAID. Windows is installed. During the install of Windows, I had to insert the driver disk of Nvidia Nforce3. It was ok, my 2 HD are now 1, in stripping, 2x 70 Go = 140 Go. I have 2 partitions on the first disk.
Linux install :
Yast find those partitions :
/dev/hdi 69.2 Gb WD740GD-00FLA1 0 9038
/dev/hdi1 39.0 Gb Linux native 0 5098
/dev/hdi2 unknown Extended 5099 5098
/dev/hdk 69.2 Gb WD740GD-00FLA1 0 9038
So, 2 HD, 2 partitions Windows, one of 40 Gb (C and the "unknown" is a 20 Gb partition (D. So, 10 Gb on the first disk + 70 Gb on the second one are FREE.
But Yast don't detect the RAID config. I tried to install Linux on the second disk, without RAID, and all the system, included Windows, didn't start anymore.
If I try to config RAID in Yast install, I have to select 2 HD fot the RAID stripping. And I haven't 2 free HD.
I know the driver Nforce3 for Linux, but it's a .run archive, so I can't use it and I can't try it in Windows. And I didn't find any place during the install where I can insert a driver disk for the RAID. It never asked me.
Sorry for my english. But if you understand what I wrote, please help me !!
|Thread||Thread Starter||Forum||Replies||Last Post|
|Mageia 2 Cannot Install 71.86.15 for Riva TNT/TNT2||kbulgrien||NVIDIA Linux||3||06-29-12 08:27 AM|
|nForce + RedHat 7.3 Success Story||rtz||NVIDIA Linux||47||02-15-03 02:20 AM|
|Red Hat null(limbo beta 3), guide to install Nvidia Drivers||utiel||NVIDIA Linux||21||09-30-02 05:32 PM|
|RAID question?||MUYA||CPUs, Motherboards And Memory||7||09-20-02 01:37 PM|
|can't install old det's after 40.41's||m!n!0n||NVIDIA Windows Graphics Drivers||1||09-16-02 11:58 AM|