Go Back   nV News Forums > Linux Support Forums > NVIDIA Linux

Newegg Daily Deals

Reply
 
Thread Tools
Old 12-23-04, 05:01 PM   #1
tugrul
Registered User
 
Join Date: Dec 2004
Posts: 5
Default NVRM: bar1 (framebuffer) appears to be wrong: 0x0 0x1

New system with a Intel SE7525GP2 motherboard w/ latest BIOS and a XFX 6600 GT Dual DVI 128MB PCI Express x16. Running 32-bit Fedora Core 3 (graphic boot disabled), same error with both SMP FC3 kernel and vanilla 2.6.9 built with similar options (removed framebuffer for one). Also same error when I gave Debian 64-bit a quick spin on the machine.

nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:03:00.0 to 64
NVRM: The IO regions for your NVIDIA card are invalid.
NVRM: Your system BIOS may have misconfigured your graphics card.
NVRM: bar1 (framebuffer) appears to be wrong: 0x0 0x1
nvidia: probe of 0000:03:00.0 failed with error -1
NVRM: the NVIDIA probe routine was not called for 1 device(s)!!
NVRM: no devices probed, aborting!
NVRM: this often occurs when rivafb is loaded and claims the device's resources.
NVRM: try removing the rivafb module (or reconfiguring your kernel to remove
NVRM: rivafb support) and then try loading the NVIDIA kernel module again.

lspci -vvv excerpt:

Code:
03:00.0 VGA compatible controller: nVidia Corporation: Unknown device 0140 (rev a2) (prog-if 00 [VGA])
        Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Interrupt: pin A routed to IRQ 169
        Region 0: Memory at d8000000 (32-bit, non-prefetchable) [size=64M]
        Region 1: Memory at <ignored> (64-bit, prefetchable)
        Region 3: Memory at dd000000 (64-bit, non-prefetchable) [size=16M]
        Expansion ROM at dede0000 [disabled] [size=128K]
        Capabilities: [60] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [68] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
                Address: 0000000000000000  Data: 0000
        Capabilities: [78] Express Endpoint IRQ 0
                Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
                Device: Latency L0s <512ns, L1 <4us
                Device: AtnBtn- AtnInd- PwrInd-
                Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
                Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
                Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
                Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s L1, Port 4
                Link: Latency L0s <1us, L1 <4us
                Link: ASPM Disabled RCB 128 bytes CommClk- ExtSynch-
                Link: Speed 2.5Gb/s, Width x16
        Capabilities: [100] Virtual Channel
        Capabilities: [128] Power Budgeting
I'll put up more details as requested.
tugrul is offline   Reply With Quote
Old 02-14-05, 12:35 AM   #2
tugrul
Registered User
 
Join Date: Dec 2004
Posts: 5
Default Re: NVRM: bar1 (framebuffer) appears to be wrong: 0x0 0x1

*bump*

Tried a new bios for the SE7525GP2. No change

Does anyone have a PCI Express nVidia board working on a SE7525GP2?
Attached Files
File Type: txt nvidia-bug-report.txt (46.2 KB, 165 views)
tugrul is offline   Reply With Quote
Old 03-18-05, 04:00 PM   #3
steintr
Registered User
 
Join Date: Mar 2005
Posts: 3
Default Re: NVRM: bar1 (framebuffer) appears to be wrong: 0x0 0x1

BIOS P07? I tried that as well, no joy. (I'm having the same problem with a GeForce 6600 on the same mobo, using kernel 2.6.10 (pristine and Ubuntu-patched)...

I'll post an nvidia-bug-report.log when I get home...
steintr is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


Similar Threads
Thread Thread Starter Forum Replies Last Post
xorg locks-up with newest nvidia drivers w/ vdpau. theroot NVIDIA Linux 1 06-24-12 12:04 PM

All times are GMT -5. The time now is 08:22 AM.


Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright 1998 - 2014, nV News.