|
|
#1 | |
|
Registered User
Join Date: Mar 2005
Posts: 4
|
Hi, need help to get tv-out working with my "Leadtek Winfast A6600GT TDH".
I have the nvidia 6629 driver installed and can enter X with it, but if I connect my TV (through a hdtv cable, and through svideo from the hdtv cable) X will not load. Have tried nvtv which gives "Fatal: No supported video card found" Have tried a lot of things with XF86Config-4 (attached). No luck. Another issue is that the general performance seems a bit poor (I think). Here is my glxgears output: $ glxgears 599 frames in 5.0 seconds = 119.800 FPS 665 frames in 5.0 seconds = 133.000 FPS 948 frames in 5.0 seconds = 189.600 FPS 1751 frames in 5.0 seconds = 350.200 FPS Thanks for any input. |
|
|
|
|
|
|
#2 | |
|
Registered User
Join Date: Mar 2005
Posts: 4
|
ok, glxgears gives a lot better output now, after a reboot. Same Xf86Conf so I guess I had some program running which sloewed down the system:
$ glxgears 20021 frames in 5.0 seconds = 4004.200 FPS 24722 frames in 5.0 seconds = 4944.400 FPS 24719 frames in 5.0 seconds = 4943.800 FPS 24722 frames in 5.0 seconds = 4944.400 FPS 24211 frames in 5.0 seconds = 4842.200 FPS Is this ok for a card like mine(on a p4 2,4Ghz)? |
|
|
|
|
|
|
#3 |
|
Registered User
Join Date: Mar 2005
Posts: 4
|
Anyone have a working tv-out on this card?
please help. |
|
|
|
|
|
#4 | |
|
Registered User
Join Date: Mar 2005
Posts: 4
|
Please, I really want to get tv-out. I have tried a lot of configurations, following the manual and posts on this forum. Its allways the same; X will not load as soon as I connect my TV. It works fine with only CRT connected.
Please |
|
|
|
|
![]() |
| Thread Tools | |
|
|