|02-15-06, 12:40 AM||#1|
Join Date: Feb 2006
driver ignores sync settings in xorg.conf
My xorg.conf includes
# will do 1280x1024@80Hz
Identifier "Default Screen"
And yet when I start X I get
(II) NVIDIA(0): Frequency information for CRT-0:
(II) NVIDIA(0): HorizSync : 15.000-79.000 kHz
(II) NVIDIA(0): VertRefresh : 56.000-75.000 Hz
(II) NVIDIA(0): (HorizSync from EDID)
(II) NVIDIA(0): (VertRefresh from EDID)
And that is what it uses, resulting in very low refresh rates. I believe the specs on the monitor (Nanao T2-17TS) are accurate. Further, in a closely related installation on the same machine I was able to achieve the advertised rates.
Full details are in the attached log.
|02-15-06, 02:32 AM||#2|
Join Date: Jul 2002
Location: Netherlands, Europe
Re: driver ignores sync settings in xorg.conf
Recent drivers indeed autodetect settings. If you don't want to use autodetection (the info is read from the monitor and is correct in most cases) you can add the line: Option "IgnoreEdid" and then it will use the info from the config file.
|Thread||Thread Starter||Forum||Replies||Last Post|
|Sync it up: Hands on with the preview of Windows 8's cloud sync service||News||Latest Tech And Game Headlines||0||06-02-12 09:30 PM|
|302.11 driver only allows native resolution settings of laptop DFP||darinmiller||NVIDIA Linux||2||05-30-12 04:45 PM|
|Redhat 8.0 NVIDIA works - INSTRUCTIONS||STEEL1||NVIDIA Linux||267||04-15-03 07:48 PM|
|Getting the proprietary nvidia driver to run with Debian 3.0 r0 (woody)||Katchina404||NVIDIA Linux||9||01-12-03 09:49 AM|
|Nvidia Driver causes crash on Standby/Suspend||dasher||NVIDIA Linux||5||09-16-02 06:57 PM|