Twinview DVI on 6800NU 8756 x86_64 kernel Oops

[iserlohn]

8178 worked fine with twinview, however, after the upgrade to 8756 X crashes on load with kernel oops. nvidia-bug-report hangs, so i've included the X log, xorg.conf and dmesg. The X process hangs and there is garbled output on DFP-1 including white and colored lines across most of the top right corner of that screen. DFP-0 remains completely black.

I've testing the monitors separately and both works fine in single screen mode on 8756.

Configuration -
XFX 6800NU PCI-E 256MB
AMD Athlon X2 3800+
DFI NF4 Ultra-D
Fedora Core 5 2.6.16-2080 x86_64 Kernel
DFP-0 Dell 2005FPW connected to DFP-0
DFP-1 Hyundai Q17 connected to DFP-1

Below is the output by running X on the shell.
---

X Window System Version 7.0.0
Release Date: 21 December 2005
X Protocol Version 11, Revision 0, Release 7.0
Build Operating System:Linux 2.6.9-22.18.bz155725.ELsmp x86_64Red Hat, Inc.
Current Operating System: Linux doraemon 2.6.16-1.2080_FC5 #1 SMP Tue Mar 28 03:38:47 EST 2006 x86_64
Build Date: 15 March 2006
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Apr 9 16:01:55 2006
(==) Using config file: "/etc/X11/xorg.conf"

Message from syslogd@doraemon at Sun Apr 9 16:01:56 2006 ...
doraemon kernel: Oops: 0000 [1] SMP

Message from syslogd@doraemon at Sun Apr 9 16:01:56 2006 ...
doraemon kernel: CR2: 00000000000000c8

[netllama]

Please generate and post an nvidia-bug-report.log.

Thanks,
Lonni

[iserlohn]

nvidia-bug-report.sh hangs while gathering information.

[netllama]

Then please generate it before starting X.

[iserlohn]

Attached -

[netllama]

The driver doesn't appear to have been correctly installed:
(II) LoadModule: "glx"
(II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
dlopen: /usr/lib64/libGLcore.so.1: undefined symbol: _nv000014gl
(EE) Failed to load /usr/lib64/xorg/modules/extensions/libglx.so
(II) UnloadModule: "glx"

Does this problem reproduce if you reinstall the driver?
Does this reproduce without TwinView?
Does this reproduce without Coolbits?
Does this reproduce if you boot with the 'nosmp' kernel parameter?
Have you verified that you have the latest BIOS for your motherboard?

Thanks,
Lonni

[iserlohn]

Does this problem reproduce if you reinstall the driver?
Yes

Does this reproduce without TwinView?
No, it works fine without TwinView

Does this reproduce without Coolbits?
Will need to test.

Does this reproduce if you boot with the 'nosmp' kernel parameter?
Will need to test.

Have you verified that you have the latest BIOS for your motherboard?
Yes. It is the latest BIOS version from DFI.

[netllama]

iserlohn,
I'm trying to reproduce this problem here, but I'm not having any success at this point. Can you please let me know which of the cards on this page is the same as what you're using?
http://www.xfxforce.com/web/product/...pa?seriesId=41

Additionally, can you please verifiy whether this reproduces without Coolbits?

Thanks,
Lonni

[wettoad]

I have the same problem here.

trying nosmp now

will post the hardware in a second

[wettoad]

recompiled to nosmp kernel and it still oops
next I will take out ACPI

[wettoad]

-If I take out ACPI the kernel doesn't finish booting.
-I've tried removing all Preemption and that kernel boots but still oops with twinview
-Ideas?

The only thing different that I can think of is that I am using an Athlon X2 in x86 mode not x86_64, but I am using the x86 driver......

[netllama]

wetload, by 'same problem' which videocard are you using? Can you point me to a URL for it, so that I can check the model number?

Thanks,
Lonni