![]() |
|
|
|
#1 | |
|
Registered User
Join Date: Nov 2002
Posts: 515
|
I'm trying to set up 2 hard drives in a raid 0 config on a silicon image raid controller. My choices are:
1:- Set up the raid in the controllers bios (which sounds great to me). But this limits me to "legacy" raid. 2:- Use the provided windows app to set up raid which gives me the choice of "legacy" or "new" type raid. Whats the difference? Is (1) hardware raid and (2) software raid?
__________________
8GB Kingston PC2-6400 HyperX (712Mhz 4-4-4-12)|Thermaltake Tough Power 700w|Creative GigaWorks S750 (RIP) Thermaltake Armour Super Tower|Dell Ultrasharp 24" Widescreen LCD|Pioneer Sata Blu-Ray |
|
|
|
|
|
|
#2 | |
|
You are great doctor!
|
Hardware should be faster I believe. Why not try both and bench?
![]()
__________________
PC - | E4300 @ 3.2GHz (9x355) 1.35V w/ D-Tek Fuzion @ 29C idle 40C load ORTHOS stable @ 3.5/1.5V | Gigabyte 965P-DS3 Rev. 3.3 | 4GB G.Skill DDR2-800 @ 888MHz 4-4-3-5 w/Corsair Dominator Cooler | **jAKUp Edition eVGA 8800GTX @ stock** w/EK FC-8800GTX block @ 42C idle 49C load | Thermochill PA120.2 w/2x Yate Loon 1200rpm| Swiftech MicroRES | Laing DDC w/Petra's Delrin Top | Masterkleer 1/2" ID 3/4" OD | WD 200GB | 2x320GB Seagate 7200.10 SATA RAID 0 | 2x Seagate 500GB USB 2.0 | Lite-On 20x SATA DVD+RW | Silverstone TJ-09 | Corsair 620W PSU | Logitech Z-5500s | Sennheiser HD-570 headphones | Audigy 2 ZS Platinum | Dell 2007FP | Dell 2007WFP |Laptop - | Dell Inspiron 1420 | C2D T7300 (2.0GHz, 4MB cache) | 2GB DDR2-667 | 160GB 7200RPM HDD | DVD +/- RW | 14.1" WXGA+ (1440x900) | Broadcom 802.11g | NVIDIA 8400M GS 128MB | |
|
|
|
|
| Sponsored Ads - Guests Only | ||
|
|
![]() |
| Shop Online | |
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|