Go Back   nV News Forums > Linux Support Forums > General Linux

Newegg Daily Deals

Reply
 
Thread Tools
Old 04-20-03, 08:28 PM   #1
simoneves
GeForce FX 5200
 
Join Date: Apr 2003
Location: Northern California, USA
Posts: 7
Default Probably not an nVidia-related problem but...

As you'll see in my reply to a later thread, I just hit a brick wall with regards to installing the latest nForce system drivers on my machine running RH9 (I found a post on nForcersHQ which says nVidia are reworking the driver SRPM to rebuild without the compile error on RH9, so I guess I'll just have to wait for that...)

I was however able to get the latest graphics driver running on my GeForce FX 5200 (not sure if it's fully accelerated, but it works). Neither of these are the problem...

The problem I have now is that after getting X to work, I then used the RH user/group administration GUI tool to add a couple of regular user accounts to the system (I had to do a text install originally which doesn't seem to let you add users other than root). They seemed to work, so I then booted back into XP to check something on the Web, but on returning to Linux it now doesn't boot...

The boot process starts normally, but when it gets to "starting sendmail" it just hangs (with a pause on "starting xinetd" just before, although that's probably normal). I left it for several minutes but it didn't go any further.

I tried it again from a cold start, and forcing Run Level 3 in GRUB (with the intention of discounting a graphics driver problem) but the problem remains...

Does anybody please have any idea what this might be? I know this is an nVidia forum, and this is almost certainly an unrelated problem, but I'm still a bit of a Linux administration newbie...

Is it perhaps something to do with the new user accounts but an unconfigured network (due to the nForce drivers not being installed)?

Many thanks in advance.

Simon

EDIT:

Just remembered that during the last successful Linux run (same session as installing graphics and adding users) I also changed the hostname from "localhost.localdomain" to a real name. I did this using the RH network admin GUI tool, which seemed to work except that when I tried to log in again it threw a warning about the new name not being recognised and that I should put it in /etc/hosts, which I did (again changing localhost.localdomain to the new name in the existing 127.0.0.1 line).

Note to self: don't make three changes at once!!!

Last edited by simoneves; 04-20-03 at 08:43 PM.
simoneves is offline   Reply With Quote
Old 04-21-03, 03:56 AM   #2
Kiamu
Registered User
 
Join Date: Apr 2003
Location: Germany
Posts: 77
Default

hmm...

changed hostname? am only guessing: maybe you just have to wait for a timeout because of being unable to connect to the network due to changes of the hostname.

maybe the solution: boot from CD and change the hostname back or disable sendmail in your sysini-scripts.
Kiamu is offline   Reply With Quote
Old 04-21-03, 06:21 AM   #3
erwos
Registered User
 
Join Date: Nov 2002
Posts: 78
Default

Actually, the standard resolution is to go into /etc/hosts and fix it for your new host name (add an alias for it).

Also, sendmail _should_ time out. Give it a couple minutes.

-Erwos
erwos is offline   Reply With Quote
Old 04-21-03, 01:47 PM   #4
simoneves
GeForce FX 5200
 
Join Date: Apr 2003
Location: Northern California, USA
Posts: 7
Thumbs up Guess I was impatient...

Sendmail does indeed time-out after two minutes, and then the system comes up normally. I'm sure I waited that long, but evidently not.

I found /etc/sysconfig/sendmail and changed "DAEMON=yes" to "no" in the hope of disabling sendmail as Kiamu suggested, but it didn't seem to work so I guess that's not how you do it.

Never mind, I can't do much in Linux until I get the nForce drivers going (see other thread) so I'll live with it...

Thanks, guys!
simoneves is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


Similar Threads
Thread Thread Starter Forum Replies Last Post
Problem connecting Pioneer VSX-S300 to Nvidia Ion - flat panel scaling solves it? wild_oscar NVIDIA Linux 3 06-17-12 07:18 AM
Need Help Installing NVIDIA Tesla M2070Q in Linux RHEL5 Ferianto85 NVIDIA Linux 0 05-18-12 08:35 PM
Problem with powermizer, nvidia 9500m gs backtoback NVIDIA GeForce 7, 8, And 9 Series 0 05-18-12 02:10 PM
Nvidia Go on laptop, black border within XFree86 problem raxip NVIDIA Linux 3 07-31-02 10:58 AM

All times are GMT -5. The time now is 06:25 AM.


Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright 1998 - 2014, nV News.