geforce4 mx 440 and VT8366/A/7 [Apollo KT266/A/333] - no 3D possible

krtek · 04-22-03, 01:11 AM

hi ppl!

when i enable the 3D acceleration in suse8.2 the screen turns black, the system hangs , only a reboot is possible.

i tried some hints, found in this forum, like reducing the agp speed in the BIOS, turing agp off in xf86conf, but as soon as i turn on 3D in yast2 or use the nvidia driver instead the nv driver, the system hangs.

below my lspci -v..pls let me know if need other system info, and if u know a work around or even solution ;=)

00:00.0 Host bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333]
Subsystem: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333]
Flags: bus master, 66Mhz, medium devsel, latency 0
Memory at d0000000 (32-bit, prefetchable) [size=128M]
Capabilities: [a0] AGP version 2.0
Capabilities: [c0] Power Management version 2

00:01.0 PCI bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333 AGP] (prog-if 00 [Normal decode])
Flags: bus master, 66Mhz, medium devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: e8000000-e9ffffff
Prefetchable memory behind bridge: d8000000-e7ffffff
Capabilities: [80] Power Management version 2

00:10.0 USB Controller: VIA Technologies, Inc. USB (rev 80) (prog-if 00 [UHCI])
Subsystem: Elitegroup Computer Systems: Unknown device 0996
Flags: bus master, medium devsel, latency 32, IRQ 11
I/O ports at d000 [size=32]
Capabilities: [80] Power Management version 2

00:10.1 USB Controller: VIA Technologies, Inc. USB (rev 80) (prog-if 00 [UHCI])
Subsystem: Elitegroup Computer Systems: Unknown device 0996
Flags: bus master, medium devsel, latency 32, IRQ 11
I/O ports at d400 [size=32]
Capabilities: [80] Power Management version 2

00:10.2 USB Controller: VIA Technologies, Inc. USB (rev 80) (prog-if 00 [UHCI])
Subsystem: Elitegroup Computer Systems: Unknown device 0996
Flags: bus master, medium devsel, latency 32, IRQ 10
I/O ports at d800 [size=32]
Capabilities: [80] Power Management version 2

00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82) (prog-if 20 [EHCI])
Subsystem: Elitegroup Computer Systems: Unknown device 0996
Flags: bus master, medium devsel, latency 32, IRQ 5
Memory at ea000000 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2

00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
Subsystem: Elitegroup Computer Systems: Unknown device 0996
Flags: bus master, stepping, medium devsel, latency 0
Capabilities: [c0] Power Management version 2

00:11.1 IDE interface: VIA Technologies, Inc. VT82C586/B/686A/B PIPC Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP])
Subsystem: Elitegroup Computer Systems: Unknown device 0996
Flags: bus master, medium devsel, latency 32, IRQ 11
I/O ports at dc00 [size=16]
Capabilities: [c0] Power Management version 2

00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233 AC97 Audio Controller (rev 50)
Subsystem: Elitegroup Computer Systems: Unknown device 0996
Flags: medium devsel, IRQ 10
I/O ports at e000 [size=256]
Capabilities: [c0] Power Management version 2

00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 74)
Subsystem: VIA Technologies, Inc. VT6102 [Rhine II] Embeded Ethernet Controller on VT8235
Flags: bus master, medium devsel, latency 32, IRQ 11
I/O ports at e800 [size=256]
Memory at ea001000 (32-bit, non-prefetchable) [size=256]
Capabilities: [40] Power Management version 2

01:00.0 VGA compatible controller: nVidia Corporation NV17 [GeForce4 MX 440] (rev a3) (prog-if 00 [VGA])
Flags: bus master, 66Mhz, medium devsel, latency 32, IRQ 11
Memory at e8000000 (32-bit, non-prefetchable) [size=16M]
Memory at d8000000 (32-bit, prefetchable) [size=128M]
Memory at e0000000 (32-bit, prefetchable) [size=512K]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Capabilities: [44] AGP version 2.0

krtek · 04-22-03, 01:57 AM

i forgot: i installed the latest nvidia drivers from the nvidia site...4349! thx in advance..

04-22-03, 01:11 AM	#1
krtek Registered User Join Date: Apr 2003 Location: Vienna, Austria Posts: 6	geforce4 mx 440 and VT8366/A/7 [Apollo KT266/A/333] - no 3D possible hi ppl! when i enable the 3D acceleration in suse8.2 the screen turns black, the system hangs , only a reboot is possible. i tried some hints, found in this forum, like reducing the agp speed in the BIOS, turing agp off in xf86conf, but as soon as i turn on 3D in yast2 or use the nvidia driver instead the nv driver, the system hangs. below my lspci -v..pls let me know if need other system info, and if u know a work around or even solution ;=) 00:00.0 Host bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333] Subsystem: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333] Flags: bus master, 66Mhz, medium devsel, latency 0 Memory at d0000000 (32-bit, prefetchable) [size=128M] Capabilities: [a0] AGP version 2.0 Capabilities: [c0] Power Management version 2 00:01.0 PCI bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333 AGP] (prog-if 00 [Normal decode]) Flags: bus master, 66Mhz, medium devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 Memory behind bridge: e8000000-e9ffffff Prefetchable memory behind bridge: d8000000-e7ffffff Capabilities: [80] Power Management version 2 00:10.0 USB Controller: VIA Technologies, Inc. USB (rev 80) (prog-if 00 [UHCI]) Subsystem: Elitegroup Computer Systems: Unknown device 0996 Flags: bus master, medium devsel, latency 32, IRQ 11 I/O ports at d000 [size=32] Capabilities: [80] Power Management version 2 00:10.1 USB Controller: VIA Technologies, Inc. USB (rev 80) (prog-if 00 [UHCI]) Subsystem: Elitegroup Computer Systems: Unknown device 0996 Flags: bus master, medium devsel, latency 32, IRQ 11 I/O ports at d400 [size=32] Capabilities: [80] Power Management version 2 00:10.2 USB Controller: VIA Technologies, Inc. USB (rev 80) (prog-if 00 [UHCI]) Subsystem: Elitegroup Computer Systems: Unknown device 0996 Flags: bus master, medium devsel, latency 32, IRQ 10 I/O ports at d800 [size=32] Capabilities: [80] Power Management version 2 00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82) (prog-if 20 [EHCI]) Subsystem: Elitegroup Computer Systems: Unknown device 0996 Flags: bus master, medium devsel, latency 32, IRQ 5 Memory at ea000000 (32-bit, non-prefetchable) [size=256] Capabilities: [80] Power Management version 2 00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge Subsystem: Elitegroup Computer Systems: Unknown device 0996 Flags: bus master, stepping, medium devsel, latency 0 Capabilities: [c0] Power Management version 2 00:11.1 IDE interface: VIA Technologies, Inc. VT82C586/B/686A/B PIPC Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP]) Subsystem: Elitegroup Computer Systems: Unknown device 0996 Flags: bus master, medium devsel, latency 32, IRQ 11 I/O ports at dc00 [size=16] Capabilities: [c0] Power Management version 2 00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233 AC97 Audio Controller (rev 50) Subsystem: Elitegroup Computer Systems: Unknown device 0996 Flags: medium devsel, IRQ 10 I/O ports at e000 [size=256] Capabilities: [c0] Power Management version 2 00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 74) Subsystem: VIA Technologies, Inc. VT6102 [Rhine II] Embeded Ethernet Controller on VT8235 Flags: bus master, medium devsel, latency 32, IRQ 11 I/O ports at e800 [size=256] Memory at ea001000 (32-bit, non-prefetchable) [size=256] Capabilities: [40] Power Management version 2 01:00.0 VGA compatible controller: nVidia Corporation NV17 [GeForce4 MX 440] (rev a3) (prog-if 00 [VGA]) Flags: bus master, 66Mhz, medium devsel, latency 32, IRQ 11 Memory at e8000000 (32-bit, non-prefetchable) [size=16M] Memory at d8000000 (32-bit, prefetchable) [size=128M] Memory at e0000000 (32-bit, prefetchable) [size=512K] Expansion ROM at <unassigned> [disabled] [size=128K] Capabilities: [60] Power Management version 2 Capabilities: [44] AGP version 2.0

04-22-03, 01:57 AM	#2
krtek Registered User Join Date: Apr 2003 Location: Vienna, Austria Posts: 6	i forgot: i installed the latest nvidia drivers from the nvidia site...4349! thx in advance..